12 Best Epoxy For Plastic – Buyer’s Guide

0
386

Healthlytalks.com is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

 Home appliances are largely made from plastic, which is a common material. Despite its durability, flexibility, and versatility, this material has many applications. Although most glues available in shops aren’t designed for this purpose, finding one that works for it can be tough. This is a common problem with plastic because it is slippery and smooth.

A smoother and slipperier surface can also be created by different types of plastic. The versatility of epoxy is often compared to that of duct tape when it comes to fixing things around the house. When you take a second look at duct tape, you realize it is a bit outdated. Moreover, the characteristics of epoxies also made them more prominent here.

Compared to ordinary glue, for example, they are stronger and dry faster. The quality of these glues is much higher than that of basic glue. In such a case, it can be difficult to choose the right epoxy. We mentioned that plastic would not be suitable for all of them.

There is a wide selection of epoxies available at every hardware store. The type of plastic you have and the strength of the epoxy you need will determine which one you choose. Having said that, we have compiled a list of the best epoxy for plastic in 2022. This is not a ranking, so keep that in mind before we get started. Here is our list of recommended items without further delay.

12 Best Epoxy For Plastic


Products


Images


Features


Price 

Best Overall


1. Rhino Glue Pro Kit, Heavy Duty 65 Gram 

  • Premium quality

  • Weatherproof

  • Quite messy

Best Budget

2. PC Products PC-Clear Epoxy Adhesive

  • 2920-pound

  • Quite strong 

  • Turns opaque

3. J-B Weld 8237 PlasticWeld Plastic Repair 

  • 25 minutes

  • Extremely durable

  • ABS, PVC, and Cpvc

Best Quality

4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 Ounce Syringe

  • 5 minutes

  • High solvent

  • Durability

5. Loctite Epoxy Plastic Bonder 0.85-Fluid

  • Two-part epoxy 

  • 25 minutes 

  • Gasoline-resistant

6. PC-Products PC-11 Epoxy Adhesive Paste

  • PC adhesive 

  • More flexible

  • Compatible 

7. J-B Weld 8280 Original Professional Size Steel

  • Drillable 

  • Psi of 5020

  • 5 oz Tubes

8. Amazing GOOP 160012 Automotive Adhesive

  • Multipurpose adhesive

  • Waterproofing

  • Remains flexible 

9. J-B Weld 50133 Plastic Bonder Structural Adhesive

  • 15-minute

  • Long-lasting

  • 2-part epoxy

10. Epoxy Putty Stick, XUDOAI Moldable Epoxy Glue

  • Ten minutes

  • Easy to handle

  • Repairing pools 

11. Permatex 84145 Permapoxy Black Plastic

  • PSI of 3500

  • 0.125 inches 

  • Chemical-resistant

12. Devcon 62345 Plastic Steel Epoxy 

  • 2,500 PSI

  • Multipurpose

  • Cold-welding

1. Rhino Glue Pro Kit, Heavy Duty 65 Gram Clear

Specification

  • Package Information: Bottle
  • Brand: Rhino Glue
  • Material: Super glue

Consider the Rhino Glue Pro Kit if you want to get the best adhesive available on the market. There are three different types of adhesives included in the Rhino Glue Pro Kit, allowing you to glue everything no matter what the situation is. 

In this line of adhesives, you will find Rhino Glue, Rhino Glue Gel, and Brush-on Glue for precision applications. This Rhino Glue bonds plastics effectively, especially those used in automobiles, due to its premium quality and versatility. 

Vibrations, shocks, and impacts are not a problem with this product. As well as being weatherproof, it has a long life. As a result of its thickness, Rhino Gel is less difficult to apply than Rhino Glue. Interior plastics, it is ideal because of its nature.

However, it can be quite messy to work with this glue kit. As a result, it cannot be applied quickly. However, the Rhino Glue Kit serves all your gluing needs with its premium quality.

Features

  • The Rhino Glue Pro Kit comes in a 65 grams clear tube.
  • Vibrations, impacts, moisture, heat, and shock are no match for the Clear Stress Tough formula.
  • A wide range of materials can be bonded in seconds, including plastics, vinyl, metals, wood, rubber, aluminum,  canvas, ceramic, and glass.
  • Faster, stronger bonds with triple distilled adhesives.
  • It’s the fastest, strongest, toughest glue ever.
Pros
  • Versatile adhesive contains three types
  • Stronger than ever
  • Durable and weatherproof
Cons
  • Quite messy
  • It’s expensive

2. PC Products PC-Clear Epoxy Adhesive Liquid, 1oz Double Syringe, Clear 70147

Specification

  • Brand: PC Products
  • Color: Clear
  • Material: Liquid
  • Item Package Quantity: 1

In our next review, we’ve got PC Products’ PC-Clear Epoxy Adhesive Liquid. There is no difference between this product and the previous one in terms of versatility.

There are many materials that can be bonded with epoxy adhesive, including ceramic, metal, wood, glass, concrete, and even fabric.

Using this liquid epoxy adhesive produces a smooth, clear, and clean finish. A 2920-pound square inch breaking strength is achieved by this product, and it is durable.

It is one of the strongest epoxy products available in syringes, which allows for equal dispensing. The color will initially appear opaque while mixing, then return to clear once it has cured. Epoxy ranges in temperature from -20°F to 200°F.

An hour after application, Epoxy Adhesive Liquid is ready for use after 4 minutes of handling. After 24 hours, epoxy is fully cured.

There are various chemical resistant properties of PC-Clear Epoxy Adhesive Liquid. As a result of its chemical resistance, it is quite strong and durable, and can withstand products like detergent, fuel oil, gasoline, salt water, mild acid, and freshwater as well.

Features

  • Various metals, woods, glass, ceramics, concrete, and fabrics can be bonded by epoxy adhesive liquid.
  • -20°F to +200°F continuous service temperature range.
  • To blend in with bonded material, it initially turns opaque, then clears to full cure.
  • Injects a solution into the wound, allowing it to cure for approximately four minutes. After one hour, the wound is fully cured, which takes approximately 24 hours.
  • Ensures durability by forming a tough bond.
Pros
  • Extreme temperature resistant
  • Durable and strong
  • Suitable for a wide range of materials
  • It’s a great deal
Cons
  • It cures properly after 24 hours

3. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz.

Specification

  • Brand: J-B Weld
  • Compatible Material: Plastic
  • Material: Plastic, Rubber
  • Package Information: Cartridge

There are more than 1600 5-star reviews on the web for this plastic repair epoxy putty. This product not only repairs broken parts, fills dents, and reconstructs surfaces, but is also useful for plastic.

With the epoxy and hardener, you must knead them together by hand, unlike other products described. The product can then be applied and worked with for about 25 minutes. In addition, the putty cures within three hours, allowing you to proceed with the project soon after applying it.

J-B plastic repair putty is an excellent choice for flexible plastics because it doesn’t dry rock hard; it maintains some plasticity even after drying. In addition to painting over sanded surfaces, you can also paint them over. When dry, the glue turns off-white.

\If you are trying to repair a flexible plastic, this epoxy putty will be the best option. Aside from its quick curing time, the glue is also extremely durable. Since you have more control over the application process, it is highly recommended if you are a beginner.

Features

  • A hand-mixable epoxy putty stick made of J-B Weld Plasticweld, which can be used to repair and rebuild a wide variety of plastic surfaces and compounds. You Can Repair ABS, PVC, and Cpvc Pipes And Plastics With J-B Weld Plasticweld! Water Can Be Contacted With Plasticweld Because It’s NSF Certified
  • The J-B Weld Plasticweld has a shear strength of 600 psi and features a combination of features and strengths. The Plasticweld can be used in applications that require constant temperatures of 250° F (121° C) or variable temperatures of 300° F (148° C). It is possible to mold, shape, sand, drill, cut, and drill Plasticweld.
  • Instant bonding
  • Pipes and plastics such as ABS, PVC, and Cpvc, bumpers for cars, sidings made from vinyl, fiberglass parts for marine repair, and plastic water tanks.
  • When the two components of Plasticweld are hand-kneaded together, it takes 25 minutes for it to set and 3 hours for it to cure. The color of J-B Weld Plasticweld starts and ends with off white
  • Plastics such as ABS, PVC, and CPVC can be repaired and rebuilt
  • Exceptional strength
Pros
  • The working time is longer. Its working time is 25 minutes, which is a great feature. If you need a glue that can handle intricate projects, this is the one to use.
  • Dryes with some flexibility. This epoxy glue is a bit more flexible than many other epoxy glues on the market. You can use this for plastic repairs that require more flexibility.
  • The cure will take three hours. Unlike other putties, this one doesn’t take 24 hours to cure. Three hours will be enough to restore it to its former strength.
Cons
  • The color dries off-white. Depending on how it dries, the putty may need to be painted over since it dries white when dry.
  • Work is a bit more involved than with other epoxy products. The materials have to be kneaded together, unlike epoxy glues that come in syringes.
  • Reusability will be difficult. It may be difficult to reuse the putty after mixing a little after it comes in a single stick. Use it all at once if you want to make it easier.

4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 Ounce Syringe, Clear, (Pack of 1)

Specification

  • Compatible Material: Wood, Glass, Ceramic, Metal
  • Material: Resin
  • Color: Clear
  • Brand: Gorilla

For its versatility and ability to create a clean and tidy finish, Gorilla 2-Part Epoxy is rated the best overall product. A coating of this epoxy can be applied to plastic, metal, wood, ceramic, glass, tiles, and other surfaces.

A strong and permanent bond can be achieved in about 5 minutes due to the fast-setting product. As soon as it dries, it becomes clear and invisible.

Plastics can be waterproofed with this epoxy, and it has a high solvent resistance as well. A variety of uses can be achieved with the product, including repairs, filling gaps, and bonding. 

A syringe containing epoxy, hardener, and hardener comes with the product. In addition to applying both substances evenly, it dispensings an equal amount of each substance. Providing great durability and versatility, this plastic epoxy is one of the best on the market.

Features

  • It is strong, long-lasting, fast, and gap-filling. It can be used on multiple surfaces
  • Easy to finish and dries clear
  • Strong bond, solvent resistance, and gap filling make this the ideal repair material for tough repairs
  • Syringe with a cap for multiple uses, resin and hardener in separate barrels to prevent epoxy from hardening
  • It takes 5 minutes for the perfect fit; plenty of time to reposition
Pros
  • Price that is affordable
  • This epoxy is great for waterproofing plastics
  • Solvent-resistant
  • Different materials can be used with this product
  • Strongly bonds with others
Cons
  • It may only be possible to use the application as a single one

5. Loctite Epoxy Plastic Bonder 0.85-Fluid Ounce Syringe (1363118), Single, Amber, 8 Fl Oz

Specification

  • Brand: Loctite
  • Color: Amber
  • Material: Plastic, Polycarbonate

One of the leading manufacturers of high-quality adhesives is Loctite. Designed to enhance structural integrity in plastic projects, 1363118 Epoxy is a specially formulated acrylic formula.

A two-part epoxy with this ease of use is also available. As a result of its double syringe, you get the right ratio of solvents because it dispenses equal volumes of each.

The epoxy forms a tough, rigid bond in 25 minutes after application, which is resistant to heavy impact, most solvents, and shop fluids. Sanding and drilling are possible due to its high impact resistance. This epoxy has some downsides, including being messy to work with and producing fumes when mixed.

Features

  • This product can be used to repair and bond most plastics, including ABS, hard plastic, soft plastic, and PVC.
  • Hardener and resin make up the two-part formula.
  • High bond strength for a long time.
  • Every application can be mixed precisely with a dual syringe.
  • The material is water-resistant, solvent-resistant, moisture-resistant, and impact-resistant.
Pros
  • Sets quickly
  • Drilling and sanding are possible
  • Mixing is easy
Cons
  • When mixed, it emits pungent fumes
  • It can be messy

6. PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114

Specification

  • Material: Paste
  • Brand: PC Products
  • Color: Off White
  • Item Package Quantity: 1

This adhesive is a good choice if you’re looking for something more durable and tough. Underwater, wet, and dry environments are all compatible with the glue. Both indoor and outdoor projects can be completed with glue. 

Aside from its resistance to saltwater, acids, gasoline, solvents, detergents, and detergents, this adhesive also withstands gasoline. If you do not want the epoxy to be visible, you may need to paint it if it dries an off-white solid color.

You can also use this kind of epoxy on overhead projects without worrying about it dripping. In addition, PC adhesive paste allows you to work for a longer period of time. It is ideal for larger and more difficult projects since you can use it for up to 40 minutes.

The product is highly recommended if you need plastic epoxy that is more flexible. An epoxy putty pound costs around $10, making it one of the best deals on the market. Putting the epoxy putty together with the hardener is easy; mix the hardener and epoxy in equal parts.

Features

  • A marine epoxy adhesive paste with two parts is suitable for use in various environments, including dry, wet, and underwater
  • The unit can be used both indoors and outdoors at temperatures ranging from 35 to 115 degrees F and at temperatures ranging from -20 to +200 degrees F
  • It binds materials such as glass, ceramic, rubber, fiberglass, cement, a variety of metals, and many others
  • Fresh and salt water will not harm it, but mild acids, chemicals, cleaners, gasoline, oil, and detergents may damage it
  • Vertical and overhead applications can be done with high-tack paste.
Pros
  • The deal is good. Its main advantage is the quantity of epoxy putty it contains at a low cost.
  • Vertical or overhead projects can be done with this. Due to its thick consistency, there is no risk of it dripping. As a result, it can be used for both vertical and overhead projects.
  • Easily reusable. You can reuse this product because it contains one pound of epoxy and it comes with twist-on lids.
  • A 30- to 40-minute work period is given to you. In addition to having a 30 minute application time, this putty is also suitable for beginners.
Cons
  • Off-white color when dried. In addition to not drying clear, this product has an off-white appearance.
  • It will be more time-consuming than using translucent epoxies to paint over the dried putty if you don’t want the dried putty to show.
  • The cure time can be as long as 15 hours. In order for the epoxy putty to reach full strength, it will need between 8 and 15 hours to cure. The object you are repairing must be handled after it has completely cured.

7. J-B Weld 8280 Original Professional Size Steel Reinforced Epoxy – 10 oz.

Specification

  • Color: Dark Gray
  • Model Number: 8280
  • Compatible Material: Plastic, Metal , Concrete, Fiberglass
  • Material: Other
  • Size: 10 oz

Our selection of the J-B Weld Original epoxy is one of the most well-known and trustworthy epoxy brands on the market due to its affordability, versatility, and reliability. With a psi of 5020, J-B Weld is the strongest on this list. In addition to metal, plastic, ceramic, wood, and glass, this epoxy can also be used on other surfaces.

Compared to most brands, this brand does pay for itself in volume with two 5-ounce tubes of epoxy and hardener. J-B Weld is malleable, just like Loctite, and once cured and hardened, it is even drillable and sandable. It dries and cures over a period of roughly six hours, unlike our previous two fast-curing/hardening epoxyes.

With its waterproof properties, acid resistance, and alcohol resistance, J-B Weld has proven its durability. Our pick for an easy-to-use, do-it-yourself epoxy was nearly a point-and-squeeze epoxy.

 Its long curing and hardening time, however, left something to be desired, especially when working on multiple projects at the same time. While this is true, it does not diminish its amazing plastic epoxy properties.

Features

  • Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair, and much more.
  • It can withstand temperatures up to 550 degrees Fahrenheit and has a tensile strength of 5020 PSI. Once fully cured, J-B Weld Original provides chemical and acid resistance, making it waterproof.
  • Repairs that are strong and permanent
  • Metal, Plastic, PVC, Wood, Concrete, Ceramic, Fiberglass, and Ceramic & Tile are some of the surfaces we can apply.
  • It takes 4-6 hours for the tubes to set and 15-24 hours for them to cure after they have been mixed at a 1:1 ratio. After J-B Weld Original has been cured, the surface can be tapped, smoothed, molded, and drilled. Set and cure colors of J-B Weld Original are dark grey.
  • Whether it’s large or small, J-B Weld can help you do it yourself. The epoxy & adhesives we use are heavy-duty and will repair & restore your property correctly the first time. The World’s Strongest Bond is delivered by J-B Weld with the highest quality, performance, and results.
  • Formable, drillable, groundable, tappable, machineable, filled, sandable, and painted
Pros
  • 5020 psi strength
  • An affordable price
  • User-friendly
  • It can be drilled, tapped, and sanded
  • The price is reasonable
Cons
  • Hardening and cure times are very long
  • Submerged cannot be maintained
  • Syringe not available
  • Colorless

8. Amazing GOOP 160012 Automotive Adhesive – 3.7 fl. oz.

Specification

  • Usage: Amateur
  • Brand: Amazing GOOP
  • Material: Plastic
  • Color: Clear

The Amazing Goop is not just effective for adhesives on plastic for automobiles, but also for all other kinds of plastic.

A multipurpose adhesive, this product also works well for sealing rubber and fabric. The quality of this product makes it one of the most affordable options.

The incredible Goop’s ability to handle high temperatures will be one of your favorite features. Additionally, it allows for sanding as well as waterproofing. The properties of this adhesive make it a good adhesive for plastics in cars.

The adhesive remains flexible under direct sunlight, a characteristic that sets it apart from other adhesives. Additionally, its structural integrity is not compromised by continuous shocks or vibrations, making it remarkably resilient.

However, this product comes without an applicator, which makes it difficult to use despite its remarkable properties.

Features

  • Car seats, floor mats, and convertible tops can be repaired with vinyl tears.
  • The screw connections are vibration-proof and maintain their strong bond to prevent leaks in hoses.
  • Battery terminals are better protected against corrosion with silicone, and windshields and headlights are sealed better with silicone
  • In and out, this sealant is the best.
  • Wires should be insulated.
  • Attach side molding strips and emblems.
Pros
  • An all-purpose tool
  • A weatherproof material
  • Extremely resistant to temperature changes
  • Long-lasting
  • Maintains flexibility
  • Affordability
Cons
  • Cons
  • Cons

9. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe – Tan – 25 ml

Specification

  • Brand: J-B Weld
  • Compatible Material: Ceramic, Plastic, Concrete, Carbon
  • Material: Epoxy
  • Color: Tan

With this 2-part epoxy plastic bonder, you can repair your plastic parts with one of the strongest bonds available. Over 800 5-star reviews have been given to J-B weld structural adhesive. It can both be used as an adhesive and a gap filler due to its quick setting characteristics.

During the 15-minute session, you will be able to use the plastic bonder. It takes around 30 hours for the curing process to complete. An easy-to-use syringe, mixing tray, and stir stick are included with the product. It just takes a few pushes in the tray to mix the desired amount. Once you’ve used it, you can reuse it again.

Adding epoxy glue to your project will result in a long-lasting, durable bond. The glue will dry tan in color when dry. You will not notice it as much if you use it on a darker-colored plastic compared to white epoxy glue.

In this manner, you will obtain a bond that is among the strongest available. My recommendation if you are looking for a hard-drying, heavy-duty adhesive is this one. Because it dries in a tan color, the product works best on plastics that are dark to medium in color.

Features

  • In 15 minutes, PlasticBonder sets and takes 30 hours to cure after mixing the two-part formula with the mixer tray and stir stick included. Tan is the color of J-B Weld PlasticBonder after it has been set and cured
  • Thermoplastic composites as well as coated metals, thermoplastics, concrete, ceramic, and fiberglass are some of the surfaces that we can handle.
  • Maximum tensile strength of 3770 pounds per square inch is achieved with J-B Weld PlasticBonder.
  • JC weld plastic bonder (Tan) offers a strong and lasting bond to many plastic surfaces thanks to its quick setting, multi-purpose urethane adhesive & gap filler.
  • A great DIY plastic repair product, J-B Weld PlasticBonder fills dents, fixes bumpers, and more! A convenient 1:1 mix ratio can now be achieved with J-B Weld PlasticBonder. Designed with a resealable cap, the syringe provides multiple uses without drying out or leaking.
  • You can DIY it with J-B Weld, no matter how big or small your project is. Epoxy and adhesives are heavy-duty and designed to get the job done right the first time. Welds made by J-B Weld are the world’s strongest bonds, because they are of the highest quality, the strongest, and deliver superior performance.
Pros
  • It has a working time of 15 minutes. Compared to other similar products that only last 5 minutes, this glue has a 15-minute working time.
  • User-friendly. To use this product, you don’t need to do much. The mixture will be ready to use after you push the desired amount into the mixing tray.
  • Easily reusable. The syringe can be reused, which is a great feature. You can store epoxy until later after finishing a project by putting the cap back on.
Cons
  • The cure takes 30 hours. When fixing something that needs to be used right away, this isn’t the best product. To handle the plastic project, you will need to wait 30 hours.
  • The color dries tan. Some people may not find this feature to be a con depending on the color of the plastic. In spite of this, most plastics will show the effect. Once the epoxy has cured, the plastic might need to be painted.

10. Epoxy Putty Stick, XUDOAI Moldable Epoxy Glue for Crack Damage Fixing Filling or Sealing. Fast Permanent Repair for Metal, Glass, Wood, Plastic, Ceramics & Other Surfaces

Specification

  • Brand: XUDOAI
  • Package Information: Can
  • Item Volume: 2 Fluid Ounces

The YANYI Epoxy Putty is excellent for DIY projects since it is extremely easy to use. All you have to do is apply it to your surface after kneading it into shape. Epoxy putty can be used for repairing leaks, repairing pools and toys, sealing pipes, and fixing appliances.

This product can be used on a variety of materials, including plastics, metals, glass, marble, and wood.

It is basically a matter of cutting the putty then kneading it until it becomes even in color, then applying it to the area that needs to be repaired. After kneading, mixing, and using the dough, ten minutes remaining. It will harden completely after 24 hours after being exposed to the epoxy for 60 minutes.

A YANI Epoxy Putty Stick provides excellent performance while being easy to handle.

Features

  • Pipes are sealed, tanks and drains are repaired, furniture, tools, gear, toys, automotive parts, pools are repaired, and cracked concrete is repaired with it.
  • The fix can be permanently fixed after one year of use.
  • The procedure is as simple as cutting, hand kneading, and applying it to the damaged area. You then need to let it dry.
  • Material compatibility ranges from metals and wood to glass, fibreglass, stone, marble, stone and wood.
  • The mixing time should be between 0 and 10 minutes, followed by the kneading time. Hardness increases rapidly after 10 minutes and 24 hours of curing. A permanent fix has been achieved after 24 hours.
Pros
  • It is extremely simple to use
  • Ensure that the bond is strong and durable
  • A wide range of uses can be achieved with this product
Cons
  • A strong odor emanates from this epoxy for plastic.

11. Permatex 84145 Permapoxy Black Plastic Weld – 0.84 fl. Oz.

Specification

  • Package Information: Tube
  • Brand: Permatex
  • Item Package Quantity: 1
  • Item Volume: 25 Milliliters

Right from the brand Permatex, this 84145 Permapoxy Black Plastic Weld brings together plastic and epoxy. As one of the best epoxy for plastic to plastic products, this product will bond with a variety of materials within a matter of seconds, including wood, plastic, ceramics, and composites.

In addition to its strong and tough bonding qualities, Permapoxy Black Plastic Welds are also very durable. In addition to being a permanent bond, this plastic weld is also strong, with a PSI of 3500.

Within five minutes of being exposed to this product at room temperature, it cures very fast. In addition, gaps can be filled with great precision with this product. It is capable of filling gaps as narrow as 0.125 inches with epoxy filler. A smooth black finish is achieved once the product is cured.

Regardless of whether the plastic object is hard or soft, Permapoxy Black Plastic Weld can bond it to any surface without primer. Temperatures range from -60°F to 250°F (-51°C to 121°C).

The good news doesn’t end there. In addition to being water and chemical-resistant, Permapoxy Black Plastic Welds are also heat-resistant. Permanent fixes are made possible with this product.

Features

  • A structural adhesive suitable for bonding materials of varying compositions
  • When set at room temperature, a fast-curing product takes five minutes to set
  • With a permanent strength of 3500 PSI, it forms a tough, durable bond
  • It is compatible with plastics, ceramics,  composites, and wood
  • Filling gaps to a depth of 0.125 inches
Pros
  • Extremely strong
  • User-friendly
  • The drying process is fast
Cons
  • No way

12. Devcon 62345 Plastic Steel Epoxy – 25 ml Dev-Tube

Specification

  • Material: Plastic
  • Color: Black
  • Brand: Devcon
  • Compatible Material: Plastic
  • Item Package Quantity: 1

Providing effective bonds to a wide range of materials, Devcon 62345 is a multipurpose epoxy.

In addition to its bond strength, this product has other exceptional features. It has one of the strongest bonds in the industry, with a tensile strength of up to 2,500 PSI. As a result, its structural integrity is not compromised during drilling and threading.

It takes up to six hours for it to set and 24 hours for it to cure, so it allows you 60 minutes of handling time.

Features

  • The two-part epoxy can be used on all types of metal repairs due to its high strength and cold-welding capabilities
  • An anti-rust steel alloy is used
  • 60 minutes for handling, 6 hours for setting, and 16-24 hours for curing
  • Water-resistant and non-flammable
  • It is possible to drill, thread, machine, or fill once it has fully cured
Pros
  • The strength of this material is incredible
  • Flame-retardant
  • A water-resistant material
  • Rust-resistant steel allow
Cons
  • Sets and cures slowly
  • Solvents cannot be exposed to for a long period of time

How To Choose The Best Epoxy For Plastic?

The best epoxy for plastic items is discussed above, along with tips on how to use it safely. It may or may not be clear to you at this point which epoxy is best suited to your needs.

The following factors should be taken into consideration when buying epoxy for plastic for your convenience. By doing this, you will be able to decide which one is right for you.

1. Applicator

It can be a daunting task to select the right applicator for your needs. You can choose from a variety of options. You can use tubes or putties to make this easier for you.

However, syringe containers are a good option if you want equal dispensing. You should get an epoxy that has a cap if you plan on using it more than once. Whenever you need it again, you can reuse it. 

2. Time to Dry

Choose the appropriate dry time option based on how much time you have available. There is a wide range of dry times for epoxies, ranging from about an hour to five hours or even up to 24 hours.

The best epoxy glue for plastic with a fast drying time is recommended in today’s age where time is money.

3. Volume

Make an informed decision about whether you want to reuse epoxy several times and fix many things with it. Choose one with more than 0.87 Oz if that’s the case. As a percentage.

4. Surface

When applying epoxy to a surface, it is crucial to take into account the type of surface. As we mentioned in our article, each plastic epoxy is compatible with different materials.

You need to make sure the epoxy you get is compatible with plastic since we reviewed products that are mainly designed for plastic applications.

5. Bond Specs

It is basically a measure of how durable and strong the plastic epoxy is. The choice is yours whether to go for a tough one or a softer one. You can choose according to your needs based on the strengths of the plastic epoxies mentioned above.

6. Resistance

An epoxy finish’s versatility and durability can be determined by its resistance to water, chemicals, sunlight, fire, and other factors. Plastic adhesive won’t dissolve if it comes into contact with water if it is water-proof.

7. Temperature

When an object collapses, it is largely due to its temperature. Epoxies vary in temperature limits, with some having higher limits and others having lower limits.

The object you are fixing should be able to withstand temperatures between -50F and 120F whether it is used indoors or outdoors. It should, however, have a maximum temperature of 212°F if it is to be kept in the freezer.

8. Tensile Strength

Bond strength is determined by the tensile strength of the material. Tensile strength is essential to ensuring strong and long-lasting bonds, so your ideal product should have a higher one. PPI (pounds per square inch) is usually used to measure tensile strength.

If you want to be sure that epoxy products are tensile strength-tested, look for products that clearly indicate the tensile strength.

9. Flexibility

The joints between plastic fixtures need to be flexible for the fixtures to last a long time. Plastic pieces break easily when they shake or bend due to a rigid or stiff connection. The best epoxies for plastics form firm bonds, but they have a small amount of flexibility in order to absorb shock more effectively.

10. Resilience

A bond may have high tensile strength, but it may not be able to withstand extreme temperatures. Epoxy must be durable if it is going to be used on plastics subjected to harsh conditions regularly.

Products are often advertised as being able to withstand extreme conditions by their manufacturers.

11. Brand

The best products do not always come from the most well-known brands, but it is impossible to go wrong with a well-known brand name.

Brands such as J-B Weld, Gorilla Glue, and Loctite are known for their high-quality epoxy products.

What Do You Need To Do To Prepare Your Plastic For Epoxy Repair?

The slippery nature of plastic makes it difficult to glue. It gets worse if the epoxy is contaminated by contaminants from handling and previous repairs. It’s not the oils or the old adhesives that will stick to the plastic, it’s the epoxy.

Make sure you scrape or sand the old glue off if you’ve tried gluing the plastic before. Putting the broken pieces in the freezer will make it easier to remove old superglue if you have used it in the past and it failed.

Clean the taped pieces with alcohol or mineral spirits if you’ve taped them previously. Oils and other residue can both be removed with both, but mineral spirits remove old adhesives better. You can use either, it just depends on how much effort you put into it.

Sanding the surfaces you intend to join increases the surface area of the epoxy, making it easier to grip. The joining surfaces only need to be roughed up a bit with a little sanding. The main purpose of this step is to take advantage of epoxy’s good gap-filling properties.

Advantages and Disadvantages of Using Epoxy Adhesives

The use of epoxy adhesives is extremely useful, but they also have a few disadvantages. If you don’t keep your eyes peeled, you might experience some headaches caused by using these products.

Advantages

There are many benefits of using epoxy resin. Whenever you need to stick something or repair something on the spot, epoxy adhesives are extremely useful. In a pinch, epoxy is your friend if you need to fix a bumper or door handle on your car when you’re stranded in the middle of nowhere. A surprising variety of forces can also be applied to them at high intensity, making them extremely durable.

In addition to being dyed and colored, drilling, tapping, chipping, and shaping if need be, any two-part adhesive we covered above can be dyed and colored when properly cured and hardened.

Almost any material can be adhered to with an adhesive of this grade, including glass, concrete, wood, metal, tiles, plastics, and almost everything in between.

Most good epoxy glue brands are resistant to foul conditions and high temperatures, which makes them an ideal glue for plastic. Therefore, these adhesives can be used to attach outdoor furniture, outdoor lighting, and even outdoor tiles. It’s highly recommended that you keep a tube or two of epoxy glue for plastic goods around your home, whether you plan to use them at work.

Disadvantages

While these products are awesome, they do have a few disadvantages, such as their ability to bond two things nearly permanently. If you are wondering how to un-glue an item, you are probably wondering what to do, but it is often easier said than done. If you’re willing to put in a little work, it can be done.

According to the packaging of your epoxy, you should be able to dissolve the bond effectively if you read the instructions on it. There are some adhesives that require special substances to dissolve their bonds, such as acetone or alcohol in some instances.

Plastic epoxy, no matter how good it is, can have its downsides, as it takes alcohol to dissolve the bonds, but it is very messy to work with. Those adhesives that do not come with two-cylinder syringes have to be applied by hand if they do not come with a syringe.

As a result, gloves should always be worn, since epoxy adhesives not only can damage your skin, but also produce toxic fumes when they are bonded. So, make sure you work in a well-ventilated environment.

There is a little more to epoxy for plastic than this, but it’s pretty standard stuff. It is essentially useless after the pot life of the best plastic epoxy runs out once mixed.

The syringe tip becomes caked with hardened epoxy, making it useless when using it. In addition, if you do not use a syringe, you will create a weak bond if you do not know how much epoxy and hardener you need to mix. In addition, epoxy for plastic can be very expensive, so this is not ideal.

Frequently Asked Questions

 What is Epoxy?

There are several different chemical compounds in epoxy, which is a thermoset plastic. As well as strong adhesion and chemical resistance, epoxy adhesives are durable and tough. These reasons are among the reasons why the substance is used by many companies for industrial purposes.
Considering epoxy’s strength, it is popularly used in adhesives. Materials such as laminated wood and concrete can be made from this material. Its chemical and heat resistance allow it to be used as an adhesive on a variety of surfaces, such as metal, glass, and wood.

The use of epoxy is not limited to industrial applications. Due to its versatility, epoxy can be used as an adhesive by crafters and DIYers. It is available in flexible, rigid, transparent, and translucent forms.

Last but not least, epoxy can be used for coatings and sealants. In industrial projects, concrete floors, wood, and other surfaces are finished with this material due to its durability.

How Long Does a Two-Part Epoxy Adhesive Take to Dry?

A number of factors affect this, such as the brand and product, the temperature in the environment, and the air flow. It usually takes 24 hours for epoxy adhesives to cure completely.

How Do You Mix Plastic Epoxy Adhesives?

Precision is required when mixing epoxy adhesives. There are some products that come pre-mixed and portioned in syringes. Getting the right ratio is easier this way. The adhesives come in putty form that must be mixed with each other, just like dough.

Can You Get Waterproof Epoxy for Plastic?

In addition to their heat and chemical resistance, epoxy adhesives have many other benefits. You can also use epoxy as a waterproof solution for leaks, swimming pools, and plumbing problems.

Is Epoxy for Plastic an Effective Product?

The use of epoxy adhesives for bonding plastics is fantastic. With their strong bond and flexibility, they are suitable for a wide range of plastics. Make sure you check whether your epoxy adhesive works with the plastic you’re using.

Will Additional Hardener Make the Epoxy More Durable?

It is necessary to mix epoxy adhesives according to a specific ratio in order for them to work properly. Strength or durability won’t be increased by adding more hardeners. Each epoxy resin can cure to a single level of durability.

How Much Epoxy Adhesive Do You Need?

It depends entirely on what you are doing and what your needs are. It is possible to buy adhesives in a pack that you can use once, or you can buy adhesives that can be used multiple times. Prior to purchasing epoxy adhesive, make sure you know how much you need.

Does Hot Glue Work on Plastic?

The answer is yes. There are certain plastics that hot glue is not suitable for, such as polyethylene and related plastics, but it does a good job on polyethylene. When working with hot glue, be careful, because the glue dries quickly after it is dispensed.

How Strong Is Plastic Epoxy?

Despite its strength and fast drying time, plastic epoxy can be used in a pinch. It is possible for fast-working plastic epoxy to dry in under an hour, but it is recommended that they be left overnight for the hardening process to take place uninterrupted. Waterproof epoxy for plastic is available from the most premium brands, which can also withstand high temperatures.

Does J-B Weld Work on Plastic?

Welding by J-B Weld can be done on virtually any material. The company sells not only clear epoxy for workpieces, plastic epoxy that is waterproof, and strong heat-resistant epoxy for a wide range of purposes, they also sell other epoxy brands that are well known and reputable on the market.

Conclusion

The market is flooded with a variety of glues that are effective, but few are plastic-friendly. For this reason, you should use an adhesive designed for making strong, durable, and safe bonds between plastic goods.

In addition to epoxy adhesives, there are other types of glue that can be used on plastics. Since they retain some degree of flexibility within the bond, they enhance the structural integrity of the plastic.

You may find some epoxies to be better suited to your needs than others, even among epoxies. The importance of doing your homework cannot be overstated. Overall the best high-quality product is Rhino Glue Pro Kit, Heavy Duty. It is waterproof and durable and also has stronger bonding than ever.

As a temporary measure, you may want to check out the Gorilla 2-Part Epoxy. An excellent product from a well-known brand that is versatile, strong, and durable. A reasonable price is also included.

In addition to being highly resilient, PC Products 70147 epoxy is great for bonding detailed projects together. This product is easy to use and makes no mess, so we picked it as our best budget pick.

The best epoxy for plastics you need should be easy to find now that you have read our reviews.

LEAVE A REPLY

Please enter your comment!
Please enter your name here