How to clean iPhone microphone?


Are your interlocutors telling you that your voice is too high or too low whenever you make a call with your iPhone? Is your voice too low or are you being disturbed when you speak? There is most likely a problem with the ‘iPhone by’ microphone that needs to be cleaned because it is dirty and would require a proper cleaning procedure. Do you think this is the case? Maybe you have already considered the possibility but you are unsure of how to proceed? I do not think that there is a problem here as far as I can see, and I will explain it to you.

In addition to your attention, I would like to spend a few minutes of your precious time showing you, actually, what are some of the actions that can be taken to ensure that the microphone of your iPhone is cleaned up so that it can be used without a problem again. The first thing I want to point out is that you will not be required to do anything particularly challenging or out of your range before you start thinking about who knows what. If you are not quite strict about how you adopt new technology (yeah, you, in short), even the simplest steps you follow are quite easy.

Our iPhone is always with us, whether it is at the office, during dinner, before or after bedroom, in the bath, or wherever. It doesn’t seem unreasonable to expect them to get a little dirty every once in a while. There are a variety of ways to clean an iPhone, but you can simply wipe it down most of the time with a microfiber cloth. What different you have to be careful about are the speakers and microphones.

Furthermore, unlike a touchscreen display that is fingerprint-proof, a dirty iPhone microphone or speaker will actually stop working if it becomes too dirty. Dust, mud, or even heavy makeup will easily cover the grille, blocking the sound coming in or going out, so the music you listen to will sound bassy and people will be unable to hear you when you speak on the phone.

It is a well-known fact that iPhones are very durable pieces of technological equipment, despite the grief they receive. Even if they occasionally encounter a droplet of water or a small splash, they will usually not be damaged. It should be noted, however, that the microphone and speaker located on the front, bottom, and back of an iPhone are still of a fragile nature. The reason they must be made of moving parts is that they are dependent on them for them to work. So, it is very easy to damage them when you try to keep your smartphone looking clean but there are a lot of ways that you can do that. In this article, we show you how to clean iPhone microphone.

How to Clean iPhone Microphone?

Be sure to prepare your iPhone before you get started with the process of cleaning the microphone. Despite the obvious nature of some points, we have included them in case you had not previously thought about them. Several things need to be done before you can properly clean any area of your iPhone, including the following:

Disconnect all the cables from your iPhone that have been connected to it.

If you have a protective cover for it, remove it from it.

Depending on whether your phone has a screen protector, you might wish to remove it.

Make sure that your iPhone is turned off.

Clean Your iPhone Before You Use It

Prior to cleaning the speakers, clean all the edges of the iPhone to remove dirt, debris, or dust that may have collected there. Besides cleaning the speakers, you may need to sanitize your device.

The lens of the eye should be cleaned with a soft, lightly moistened cotton cloth or a lens cloth that does not contain lint.

You should wipe out every side of your iPhone with a soft cloth, such as the backside, and those that do not come in contact with it very often.

In the case that the cloth on its own did not work, soak the cloth in soapy water and put it to dry before giving it a try again on the iPhone.

You may use 65% isopropyl alcohol to sanitize the iPhone or a sanitizing wipe (Never remove the sanitizing wipe from the iPhone with bleach-containing wipes)-wring it out afterward.

You need to use a soft cloth to wipe all the outer surfaces of an iPhone.

Make sure the iPhone is allowed to dry naturally.

Find out where your iPhone speakers are located

Furthermore, you should also know that your iPhone has three speakers and a microphone located on the top left and right respectively. In each case, you will find a metal grille that prevents dirt from getting in but allows it to accumulate on the outside. This is an excellent way of keeping dirt off your device.

A camera such as this is located right next to the FaceTime camera on the front of your iPhone. Additionally, your iPhone has a series of circular holes at the bottom of the device, and then another circular hole next to the camera in the back. The speakers and microphones on your iPhone should be cleaned periodically.

When it comes to cleaning the phone Microphone, there are a few things that are essential. Here are the following elements, which you need to use to clean the microphones on your iPhone:

A soft brush should be used

In the beginning step, you will need to properly clean your iPhone microphones technically, using a normal soft-bristled brush, which you will need to use with a very soft hand. In choosing the brush you want to use to clean the microphone, you might want to choose a normal toothbrush, or you might want to choose a paintbrush. In any case, one thing you need to keep in mind before you start using the brush is that it will need to be completely clean and completely dry before you use it. It is recommended that if you were going to use a paintbrush, then you should place the bristles down to get the maximum control of the brush to enable you to clean it properly.

As you begin to brush the microphones clean, you must take more care to be sure that all the dust in the microphone is removed. Don’t be rough while doing it as you will damage any part or part of your body unknowingly if you do not use a very soft hand.

Apply painter’s tape

It should be noted that the painter’s tape, which is a type of masking tape, is specifically designed to prevent glue dust from sticking to surfaces. There are some special characteristics associated with it. One of these characteristics is that it is a handy tool for cleaning the microphones of the iPhone. Nevertheless, I do want to remind you that you should proceed with care when using this particular tool to clean your microphone because if any glue gets stuck inside the phone due to your unconsciousness, then the phone will become dirtier than before.

You will first take some tape and roll it into a tight circular motion, then insert the sticky side of that tape into the microphone, and then press it into the mic. You can change the tape immediately if you notice that the tape has brought any dust into the microphone at that point. Doing so will ensure that the dust does not return to the microphone. Take care not to damage the microphone.

Using Toothpick to this Situation

There is no better way to remove dirt than to pick it with a toothpick. Toothpicks are a great way to eliminate unclean iPhone speakers, and they should be used often. In this case, as well as with anything else, you need to use caution in order to avoid damaging the fragile grille of the television.

If any dirt remains on the speaker after cleaning it with the toothpick, make sure to scrape it away carefully with the toothpick before rubbing it out with the toothbrush. The toothpick may need to be dampened if the dirt is difficult to chip away even with most of the dirt chipped away.

To avoid the toothpick splintering off your iPhone screen and causing unwanted clutter, ensure that your toothpick doesn’t splinter off. 

Utilize the toothpick as a means to transfer moisture from the air to the dust and loosen it. Because liquids can easily get through the grille and damage your iPhone, you must take extreme care when transferring liquids to your phone. Moisture can easily get through this grille and damage your phone.

Cleaning Products for Removing Dirt

If any debris is stuck, gently puff it away with compressed air. There is nothing better than compressed air for cleaning dust inside electronics and other hard-to-reach places, removing dirt, and removing grime. Go to your local retailer to get yourself a can. To make sure that you are successful, here are a few suggestions:

If you are blowing the air directly into the hole, you will risk damaging your phone if you do so.

The blast should be aimed parallel to the microphone if you want for optimum results.

If you have any stubborn gunk clogging your electronic device, clean it with a putty intended for electronics. There are many companies that sell this kind of product online, as well as in stores. In your hand, take a small amount of the putty gently press it into the hole in the microphone, and then press it gently out. Do this as often as needed until your microphone is completely clean.

Slime should not be allowed to sit for more than a few seconds; otherwise, it will begin to ooze and the device will begin to malfunction.

If you would prefer to make your own cleaner putty, you may wish to do so. It is best to have 12 ounces of warm water, 1/4 cups of borax, and 5 ounces of white school glue on hand if you want to make your own cleaner putty. The following directions will show you how to do it:

Dissolve eight ounces of warm water in a paper cup and add the borax. Keep aside.

Mix the remaining water with the glue in another bowl and let it sit for a few minutes. Ensure that the glue is well blended.

Stir the mixture of borax and water together until it gets firm.

If you knead the substance for about 5 minutes, you will get a ball of ooze that is dry to the touch.

Putty made at home should be used in the same way as store-bought putty.

If the putty cannot be formed into a ball, it should not be used as a cleaner. To get the right consistency, you may want to add a little more borax.

You may also try gently blowing on the mic so as to remove any last remnants of dirt that may remain after the cleaning task has been completed if you still see signs of dust and/or dirt visible after the cleaning procedure has been completed.

Your guidance on YouTube may lead to some further research on the subject, so you can watch any of the numerous video tutorials focused on the subject if something is not clear to you. In addition, you should also consider that you might run into videos that provide methods that do not strictly follow orthodoxy or, regardless of the issue, may endanger the proper operation of your iPhone. In my opinion, I believe that one should stay away from experiments and do not attempt to do them in order to avoid problems. You are under no obligation to use this method, so it is completely up to your own sense of discretion.

Tip: If there are any further problems

Is it still a problem for you to use the iPhone’s microphone despite having carried out the cleaning operation mentioned above? If the problem is not related to hardware failure, then it could be a temporary “catch” or it may even be a problem associated with bad reception of the signal from the phone’s company. It all depends on the problem.

Please follow the instructions on what to do that I have given you here in order to rule out this or that cause and in order to attempt to remedy it, I would suggest that you follow the instructions below.

Testing the main microphone

Since any problems in the use of the microphone could be caused by damage at the hardware level, I suggest that you first test the microphone on the main board of the device in order to rule out (or to consider) this possibility. In order to do this, you simply need to use the app Voice Memos, which is included in every phone with an Apple sticker on it. Let’s see how you can do it right now.

The first thing you need to do is unlock your Apple phone, go to your home screen, and tap the Voice Memos icon (the one with the black background and the path).

If the main screen of the application appears, press the red circular button in the lower center of the screen and then speak into the microphone. Once the main screen of the application displays, start recording some short audio clips. Keep clicking the same button on the screen to end the recording after a few minutes of recording.

Play the audio clip you recorded under the timeline by clicking the Play button that you can find at the top right side of the screen, just below the timeline. You should be able to hear the sound of your voice clearly if you are not affected by anything that occurs to the iPhone’s microphone so that you can get the clarity of voice and the best possible sound quality.

Testing the bottom and the rear microphones

As an alternative to the lower back iPhone, using the app Camera on the device, you are going to record a video using the front-facing camera of the iPhone as the microphone for the test.

The next step would be to get the iPhone, unlock it, go to the home screen, and choose the Camera application (which has a grey background and a black camera). Next, you will have to choose the Video option from the bottom of your screen, then you should choose the front-pointing camera (if not, you can do that by clicking on the button with the camera and arrows on the right-hand side) and then you will have to tap the circular red button to begin recording a movie, and finally, you have to begin speaking into the microphone.

In a few minutes, you should stop recording the video by tapping the above button again, then you should exit the Camera app, launch to the app gallery (the one with the icon of a flower), select the recording you just made in the section Gallery of the app, and press the Play button on the screen to start playing back the recording.

In order to test the rear microphone as well, you should carry out the same steps shown above except that you will have to make sure that the camera you are using is the one on the back of the phone (if it is not, you can always set it by selecting on the button with the camera engraved in it to the right side of the screen).

If the microphone on your smartphone is operating properly, your voice should not sound dim, the voice quality should be optimal, without distortion, squeaks, or hisses. This goes for both videos recorded with the front camera as well as those recorded with the rear camera.

Some Frequently Asked Questions by Users

What is the best way to clean the inside of a microphone?

Whenever possible, remove the grid on these microphones so that you can wash them with lukewarm water and soap. The grid should then be replaced on the capsule after it has dried. Using a cloth moistened with a solution of warm water and soap, wipe down the rest of the microphone. Once the microphones have been cleaned and dried, they should be left for 72 hours before use.

What is the reason for my phone’s microphone being muffled?

Ensure that you are able to be heard as clearly as possible on a telephone call if you are using the headphones with the microphone attached. I believe that if the answer is yes, the phone’s internal microphone is probably not working properly, or possibly the lint or dust has partially blocked the voice inlet hole at the bottom of the phone.

What is the problem with the microphone on my iPhone 7?

It is strongly recommended that you unplug any accessories that are plugged into your iPhone’s headset jack. It is important that you do not block the iSight mic with your fingers while holding your tablet while you are recording a video if you are having problems with the microphone. Make sure there is no dirt, dust, or debris blocking the microphone.

What is the reason for the muffled sound on my iPhone 11?

When you receive a phone call or a notification on your iPhone, you may notice that the speakers sound muffled when the volume is low. … The volume on your iPhone can also be adjusted by navigating to the Settings and then Sound and Haptics or adjusting the slider under Ringer and Alert under the Ringing and Alerts section.

How can a microphone be damaged?

The physical damage to a dynamic microphone is almost impossible at any level of sound that can be achieved. Ribbon microphones that use an aluminum ribbon and which are made of classic materials are vulnerable to damage not as a result of sound pressure but due to a puff of air. In fact, if the ribbon is blasted far enough out of its magnetic gap by a burst of air, it could physically stretch out.

The bottom line

Now that you have understood how to clean iPhone microphone, I hope you have understood what I meant. It would be very much appreciated if you could share this article with your friends and family members and if you find any problem with this guide, so please feel free to let me know in the comment section below.

You can also read


Please enter your comment!
Please enter your name here