Many people are concerned about keeping their objects clean these days, which includes keeping their iPhones clean. This is because the iPhone has the highest amount of dirt. Whether you’re at work, at bedtime, at dinner, or in the bathroom, your iPhone goes everywhere with you. Consequently, it is understandable that it would get dirty over time.
It is easy to clean your iPhone, just use a microfiber cloth to wipe it down. Are you sure that’s all you have to do? I doubt it. As time passes, the speakers acquire lint, dust, and dirt, resulting in a reduction in sound quality. A large amount of dirt settles on the speaker grille, so the audio cannot be heard.
To clean the speakers, Apple recommends clearing the debris. There is a bit of difficulty in understanding, but do not worry, we will help you out. So you will know how to clean a speaker on your iPhone, we will discuss how to clean the dirt with seven different methods.
These delicate problem areas can be cleaned more easily. Some cleaning tools are at home or can easily be obtained from a nearby store; they are either at your house or can be quickly obtained.
Do not worry, though, it is still a simple process. The following instructions will teach you” How To Clean iPhone Speaker?“. We’ll start with a few basic things that need to be done carefully.
Make Sure Your iPhone Is Ready For Cleaning
Before you clean any part of your iPhone you should do a couple of things. If you have a case, remove it before unplugging any cables, and turn off your iPhone.
As well as do’s, there are some don’ts when cleaning speakers. When cleaning out the speakers, do not use cleaning agents, water, or compressed air since these could damage the hardware.
Why You Should Clean Your iPhone Speakers
Getting the speakers cleaned out is a good idea if you have had your iPhone for a while, maybe just a few months. In fact, the speakers can accumulate a lot of gunk.
You can even get dead skin cells on your phone from keeping it in your pocket, dirt, dust, and lint. Playing music through your iPhone may experience problems the more that builds up in them. Keeping your iPhone in top condition means cleaning the speakers frequently.
How to Clean iPhone Speaker From Dust or Water?
Eventually, there are holes in your iPhone’s speaker that will become blocked with dust, dirt, or wax, no matter how you use it. Playing music, answering incoming calls, and speaking over a phone call will all be affected by this.
Your iPhone speakers must already be a topic of interest to you, right? You might be wondering how you can clean them in an undamaged manner. The iPhone speaker holes can be cleaned in the possibilities are endless but we’ve selected this as the safest method.
Here is how you can clean the dust off the iPhone speaker grills using the best methods available. Methods are sorted by how easy and safe they are. Before you attempt speaker cleaning on iPhones, make sure you read the Dos and Don’ts.
Clean the iPhone Speaker Holes
There are two speakers on iPhone, as you might already know. Make sure you take care of both. Two sets of speaker holes can be found at the bottom edge of new iPhone models, including iPhone 8. We will talk about among them, one only, who is also a speaker.
Taking a look at grilles on speaker enclosures on iPhones, we can see that they are it can be found at the bottom edge. Click it to find to view the iPhone from its front, the speaker is on the right, and the microphone is on the left. Compared to the secondary one, the dust clogs and the water leaks more in this design accumulation. Here is an image of it.
Here’s how your iPhone’s secondary speaker looks, we will see that it is located at the top of the screen. During a call, you can use this in the form of an earpiece in addition to the main speaker. It is comparatively less likely to get clogged drains and dust inside of a tiny speaker grill.
you can clean the iPhone speaker by following these instructions, determining to listen to the speaker who is causing the problem you problems due to dust before using the methods explained below. Listening to the earpiece does not work properly during audio calls; the issue must be speaking with the second speaker above the screen. There is a problem usually speaker grille on the main unit if incoming ringtones or music playback are affected.
7 Ways To Clean Your iPhone’s Speaker
We have gathered the top 7 methods for cleaning iPhone speakers efficiently and effectively.
1. Clean The iPhone Speakers with Soft Brushes
A soft-bristled brush is the best way to clean the iPhone speaker efficiently. Even so, it is not an Apple product that recommends any particular cleaning method for speaker grills, you are officially recommended to use in case of brushes like these it is needed.
You should check the toothbrush’s softness by pressing it firmly between your fingers, and confirming the product is classified as “Soft” or “Extra Soft”. The slightest bit of hard bristles should not be used on a toothbrush.
In addition to toothbrushes, soft paintbrushes can be used. Brush bristles are even softer and more delicate than toothbrush bristles to prevent damaging speaker grills.
You can also use soft paintbrushes in place of toothbrushes. Brush bristles are softer than toothbrushes so you won’t damage the speaker grills. Paint Brushes have even tinier, softer bristles than toothbrushes.
2. Use Masking Tape To Remove Dust
You can effectively clean you can turn your iPhone speakers off by using masking tapes, or painter’s tape. What is masking tapes used for? After peeling off the masking tape, there are fewer particles and residues from adhesives left behind than with normal scotch tapes or duct tapes. Peeling them off is also much easier.
With masking tape, you can easily clean the speakers in the earpieces grill on your iPhone. You can wrap a piece of painter’s tape around your earpiece speaker then simply paste it. You can catch more dust by using your fingernails to the tape should be drawn over. Remove the tape carefully after that from your iPhone to clean its speaker.
It is possible to bottom speaker grills should be cleaned with masking tape as well. Compared to the original, the main speaker hole is much deeper, so it won’t be as effective as you might think.
3. Using cleaning slime or pumice
It is sometimes difficult dust mixed with oil or wax that needs to be removed with all of the above methods. Getting rid of slimes or putties such as AirSquares can be used in such a case. If you have watched any craft videos then you are certainly familiar with such slimes.
For removing dust from the speaker holes of the iPhone, cleaning putties and slimes can be quite effective. It can also be used to clean your iPhone’s earpiece speaker and main speaker grills.
4. Dust blowers should be used
Putting our hands on the belly, it blows air. Most of us have one of these tiny dust blowers. It is so cheap to buy these tiny blowers, which you can easily find for under two dollars. To remove the dust from there are vents on the speakers of your iPhone, use a dust blower to force air into them.
It is important not to confuse dust blowers with leaf blowers. The dust blasters work well in removing tiny, nonsticky dust particles since they blow a small amount of air into your iPhone speaker.
5. Apple’s speaker holes can be cleaned with canned air
You can remove hard dirt and dust also you can play music through your iPhone speaker using canned air or gas duster. This method is not recommended to you the other methods will not work unless and until are effective.
Warnings: There may be harmful ingredients in canned air/compressed air/gas duster, which could pose serious health hazards. Use carefully and follow all safety precautions. The direct blowing of air speakers built into iPhones may be included also lead to permanent damage.
To remove the dust from your speaker grills, From a safe distance, blow air into the ears (not directly into the ears grill) using a can of compressed air. In many cases, this method is effective at cleaning the iPhone’s speaker grills.
6. Brush Speaker Dust Off With a Toothpick (carefully)
There may still be some dust particles at the edges of the speaker vents, the air still remains pressurized after blowing them. This process is the only way to eliminate such particles. If you want to clean the iPhone speaker grills, you can use a toothpick or a very small piece of plastic.
Make sure you have enough light and can see the speaker grills before you go in; you don’t wouldn’t mind making any errors. Do this with extreme care, as a small flaw can cause permanent damage to your iPhone speaker.
7. Using Sound To Get rid of the water from a Speaker
You might not be able to hear correctly for a few minutes after your iPhone speaker gets wet from rain or dipping in the water. It might sound crackly even after this. It must be because there is the speaker holes have been clogged with the water of the iPhone speaker while playing music.
The above methods do not make it easy to get rid of the water on the speaker grill. However, you can easily expel water from an iPhone speaker by playing some noise at a certain frequency. If you have a wet iPhone speaker grill, can be dried by playing such noise on many websites and apps.
It is possible to generate such noises in any frequency with the Sonic app from the App Store. To repel water from a speaker, produce noise at 160Hz or above. To clean your iPhone’s wet speaker more effectively, you can experiment with different levels of noise.
You can also keep your iPhone speakers with silica gel to completely remove water particles.
Here Are More Tips For iPhone Users:
