When it comes to pairing, AfterShokz is straightforward and simple. AfterShokz headphones can be connected to new devices or switched among devices easily. With a quick and easy pairing process, you’ll be able to enjoy a quick and easy open-ear bone conduction listening experience right away. Here you will find complete information about “How To Connect Aftershokz To iPhone?” Read it below!
How To Connect Aftershokz To iPhone?
Before you begin, make sure you turn off your headphones. If you hold the volume+ button for 5-7 seconds, you will be able to enter pairing mode on your device. Upon pressing the power button, Audrey will say “Welcome to AfterShokz.” Continue holding the power button until all the LED lights flicker red and blue.
Open your Settings menu, then select the Bluetooth section, and then select the headphones you want to use. Audrey will say, “Connected.” Now you will be able to use your headphones with your iPhone.
Common questions about Connecting Aftershokz To iPhone
1. How will Air pair with devices?
The Air will pair with most Bluetooth devices, including phones, tablets, computers, and watches that use Bluetooth 3.1 or higher. It cannot, however, be paired with gaming consoles. Certain transmitters may be incompatible with it as well.
2. How do I pair Air with my device?
- If you have headphones on, it is best to turn them off.
- If you press and hold volume+ for 5 to 7 seconds, you will enter pairing mode. Continue to hold the volume + button until the LED light blinks red and blue and Audrey will say, “Welcome to Trekz Air.”
- Audrey will say “Connected” after you open the Bluetooth settings on your device. Choosing “Bluetooth” under Trekz Air by AfterShokz will open the Bluetooth options.
It should now be possible for your headphones to be connected to your device.
How do I pair Air to multiple devices?
There is a multipoint pairing feature in Trekz Air that allows the user to connect to two devices simultaneously. Even though you won’t be able to listen to audio from both devices simultaneously, you will be able to seamlessly transition between one device and another.
Multipoint pairing involves pairing multiple devices:
- Your headphones should be turned off before you begin.
- The pairing mode can be entered by holding the volume+ button for 5-7 seconds until the LED lights flash red and blue to indicate it is paired.
- For 2-3 seconds, press and hold the volume+ button and the multifunction button together. After 2-3 seconds, Audrey will say “Multipoint Enabled.”
- Connect the first device to Bluetooth. Audrey says that the device is connected.
- Make sure your headphones are turned off.
- Press and hold the volume+ button for 5-7 seconds to enter pairing mode once again, until the LED light flashes red and blue once more.
- The second device should be paired with the first. “Device Two is connected”.
- Make sure your headphones are turned off.
Both devices should now have your headphones connected.
What is the most convenient way to switch between devices?
As soon as the Trekz Air is paired via the multipoint pairing process, the device will connect to the device that is closest to the Trekz Air. In the case where both your devices are in range, it will connect to whichever device you were most recently using. You can switch devices with some notifications, such as a phone call, or just by using a device that is on the other side of the network. Note: Some devices and transmitters might not be able to handle multipoint pairing.
These devices should not be paired with my Air. How can I pair new devices with my Air?
Resetting the Trekz Air headphones will allow you to change the devices with which it is paired, and then pair the new devices.
You might also like:
