Here are a few methods to how to fix sound on iPhone? that have been proven to work. The following post will be of assistance whether you are having trouble hearing sounds during a phone call while playing a game while listening to music, or when you simply cannot hear any sound at all. See which solution works for you by following all the options below.
16 Best Ways For How To Fix Sound On iPhone?
1. Your iPhone Needs To Be Restarted
Let’s get started. Restarting the iPhone first is what we recommend you do if you have a problem with the speaker on your iPhone. Many software-related iPhone problems can be solved by restarting the device
- Press the Power button long enough so that you see a slider appear on the screen.
- Wait until your phone dies completely by dragging the slider to the right.
- You will see the Apple logo after a few seconds of holding down the Power button.
You can check if you can hear sounds on your iPhone after it boots up or uses the other solutions listed below.
2. Try Out The iPhone Speaker
We have to make sure that the speaker works before continuing. This can be accomplished by playing a song, video, ringtone, or even making loudspeaker calls. You can test the speaker by going to the ring settings on your iPhone.
- Select Sound & Haptics from the Settings app on your phone.
- To increase the sound volume, move the volume slider to the right below the Ring and Alerts section. If the speaker is working, a sound should be heard. To fix the problem, visit the repair shop or follow one of the other solutions below.
3. Don’t Disturb Mode Must Be Turned Off.
It allows you to mute sounds and notifications based on schedules or manually when turned on. Do Not Disturb (DND) mode can be found on iPhones and most other devices. In DND mode, only starred contacts and alarms will send you alerts on your phone. Turn off DND mode on your iPhone if the sound has stopped working.
Simply toggle off Do Not Disturb from Settings > Do Not Disturb. The Control Center also allows you to turn it off.
4. Be Sure The Volume Is On
While you were doing that, you might have mistakenly decreased the volume on your iPhone in an app. If this is the case, please open an app, such as YouTube, Music, You can use any sound-playing app. During playback of content in the app, turn up your iPhone’s volume by pressing the Volume Up button.
Therefore, for iPhone users experiencing problems with the sound during calls, please make a call and increase the volume while the call is in progress.
5. Bluetooth Should Be Turned Off
To prevent your whole audio session from being sent to a Bluetooth audio device, you should also turn off Bluetooth on your iPhone. Suppose you forgot to turn off and disconnect your AirPods after using them, Apple would continue to transmit the sounds through the AirPods until you turned it off.
Turn off Bluetooth in your iPhone’s Control Center to ensure that’s not the case. Alternatively, you can shut off and disconnect the Bluetooth by clicking Settings > General > Bluetooth.
6. Upgrade Your Phone System
Ensure that you’re using the latest version of iOS on your iPhone as a part of fixing the sound problem on your iPhone. As Apple’s culture dictates, software updates are released when needed to solve problems with iPhones. You can check for the latest iOS version in Settings if you’re not sure if your iPhone sounds are working.
- Select the Settings option in your iPhone settings.
- Check for pending updates by clicking Software Updates right there. Install the update if necessary by connecting to a strong Wi-Fi network.
7. See Silent/Ring Mode
You can check the Ring/Silent switch as the easiest way to fix this. The silent mode may be turned on in your iPhone. Turn on the loud mode by flicking the switch the other way if this is the case. To turn up the volume on your device, press the volume controls (“+”/”-“).
8. For 15-20 Seconds, Press Your iPhone’s Bottom Right Corner
Before we close, let’s try one more trick. There was also a simple solution for users who complained about the sound on their iPhones. You might find it useful too. Your iPhone’s speaker is located on the right corner, which you only need to press (or squeeze lightly) if you want to activate it. Press and hold the bottom right corner of the iPhone for 15-20 seconds when it is placed on a flat surface or in your palm. Be gentle so your iPhone doesn’t crack. If the trick works, test the iPhone speaker again.
It’s time to call Apple support or a competent repairer near you if you are still unable to fix iPhone not making sound issue on your iPhone.
9. Debris/Dirt Must Be Cleaned
Make sure all debris is removed from the receiver mesh, the lightning connector, and the speaker with a brush. Be sure to use a brush with soft bristles that is clean and dry. Ensure that your gadget’s speaker can be seen if it is in a case or bumper. If all the extra dirt is not removed by rubbing alcohol, acetone, or methylated spirits, then use them.
10. Restore An Old Version Of The Software With Working Speakers
Back up an iPhone system that is fully functional, and try switching back to it. All photos, media, and contacts you add following this backup will be deleted. Select iCloud in Settings. From the Storage & Backup menu, select your restore point. If you already have an iPhone backup, you can restore it via iTunes.
11. The Settings Will Be Reset.
Resetting the iPhone’s settings will fix your sound issue if none of the steps above work. Resetting these settings will take them back to the defaults on your iPhone. You can do so by going to Settings > General > Reset > Reset all settings.
12. Keep iPhone Apps Up To Date.
It is possible for an app developer to make a mistake that causes the lack of sound. Check for app updates in the App Store > Updates section. The Updated Recently section shows only apps that have been updated recently.
13. You May Need To Check The Sound Settings Of a Third-Party App.
Customizable volume and mute settings are included in many third-party apps. You can, for example, adjust the volume, music, sound effects, ambient audio, and more separately in some games.
Simply go to the app and look under the audio or sound preferences. Make sure that any customized mute options have been turned off, and that the audio is enabled. Tap an icon to make it active or move sliders to the right, depending on the app.
14. Plug In Your Headphones
Then quickly remove your headphones from the headphone jack after inserting them. It can sometimes be stuck in headphone mode and this usually unsticks it. Please continue this for a few minutes if it doesn’t work. Furthermore, it can remove any debris or dust lodged inside.
15. Jailbreaking An iPhone
Find out which file directories are causing the issue by Jailbreaking your iPhone. As a result, the iPhone will think it is in a dock as you delete the file. Music docking stations and other devices will still function. The best option for you will be if you already have a jailbroken iPhone or are willing to jailbreak it.
16. Use Hairdryer To Dry Moisturizer From iPhone Speaker
My experience was great with this! A small amount of time with squeezing worked for me. After failing with a variety of other remedies, I thought of my own cure. I used my a for the hairdryer! Simply hover your hairdryer over the speaker socket for approximately 5 minutes.
In addition to the headphone jack, I also made it. It’s likely that there was some residual moisture that was removed by the hairdryer. In this time, the speaker began to sputter intermittently but eventually came to life. It is also possible to put the iPhone in dry rice while it is turned off without a hairdryer. You will get all the moisture out this way. I recommend leaving it for at least 12 hours in rice.
Explore More About iPhone: