You may be surprised by how big a problem it can be if your iPhone speaker stops working. Even if you use headphones to listen to music, you won’t hear incoming calls, alert tones, and other features without sound coming from the speaker.
We demonstrate how to fix speaker on iPhone in this guide. Our guide examines eight simple ways you can fix your iPhone if it isn’t making noises.
Is the speaker on my iPhone damaged?
As of now, we have no idea. Not working is not the same thing as being broken. If your iPhone does not play any sound or only a few sounds, you should do an iPhone speaker test. Verify that your iPhone speaker works during calls by testing your ringtones and media sounds.
The two reasons why your iPhone speaker won’t work are explained by understanding what happens every time your iPhone makes a sound:
- This software determines which sounds and when they should be played.
- This is achieved by the built-in speaker that you will find on the bottom of the iPhone. It translates the instructions from the iPhone software into sound waves you can hear.
Does the iPhone speaker stop working for no apparent reason?
You may not be able to hear your iPhone speaker at all or it may be muffled if the software is malfunctioning. There’s good news: Almost all software issues can be solved from home. However, hardware problems are harder to fix.
Apple iPhone speakers are among the most vulnerable components on the phone. During the vibration of very thin pieces of material, sound waves are created. Whenever the material of the iPhone speaker is damaged, the device stops working, makes static noises, or becomes muffled.
Where Can I Find Out If It’s A Hardware Or Software Problem?
As a customer service rep, I always tried to fix the iPhone’s software before I replaced the speaker. It’s free to fix software, but speakers aren’t. I could keep replacing the speaker and the iPhone still wouldn’t play sound if it was a software issue.
Replacement iPhone batteries frequently result in people being surprised when their battery drains just as quickly or even faster after replacing them. Upon closer inspection, they discovered the battery drain issue was caused by software from the beginning.
The reasons why your iPhone’s speaker isn’t working
When the speaker on an iPhone doesn’t work, repairing it is not always difficult, but it may be tricky. Due to the fact that there are numerous factors that can stop an iPhone’s speaker from functioning.
When it comes to iPhone speakers, the exact cause isn’t usually apparent until you attempt to fix the problem. You may need to skip the software and clean the iPhone speakers if the speaker is working, but not as loud or clear as it should be.
How to fix speaker on iPhone?
These steps will help you troubleshoot an iPhone speaker that isn’t working and fix it.
1. Check the volume and ringer of your iPhone
There are three buttons on the side of every iPhone: the volume rocker, the ringer switch, and the mute switch. A ringer/mute switch turns off your phone’s sound for calls and notifications, while volume buttons adjust the device’s volume.
Changing the ringer switch will enable your iPhone speakers to work again. By flipping the phone down (or towards the back), the orange underlay will appear, and then flipping it up again, you will get the full effect. You can also turn up the phone’s volume.
2. Check your sound settings
There could be a problem with the sounds associated with certain functions of the phone, for example, the ringtones for incoming calls and notifications. Make sure the settings are correct in Settings > Sounds & Haptics.
Once you have adjusted the volume slider, moved the toggle switch to the on/green position, or set a new ringtone, you can now set a new text tone.
3. Make sure the iPhone is not stuck in headphone mode
iPhones are only capable of sending audio output to a single location at a time. There is a possibility that your iPhone speakers may be functioning normally, but they may be stuck in headphone mode. It turns out that there is a bug that allows the iPhone to send audio to the headphones, even when the headphones are not plugged in.
4. Disable Bluetooth
A sound from the iPhone cannot be played by the iPhone speaker if the audio is routed to another device. If you don’t hear anything, it might be that your iPhone is sending audio to a Bluetooth speaker rather than to your ear.
It will then play audio through the iPhone speaker again if Bluetooth is turned off. The Bluetooth toggle switch must be set to off/white to turn off Bluetooth.
5. Check your audio output settings
There may be an external speaker connected to your iPhone via AirPlay without your knowledge. If this is the case, it would be advisable to now switch the speaker settings away from AirPlay and switch them back to the built-in speaker on the iPhone in order to receive the sound coming from the iPhone speaker. In order to accomplish that, open Control Center, then select the AirPlay icon located in the upper-right corner of the playback control panel. If you haven’t already picked it, select the iPhone.
6. You need to restart the iPhone
While it may not solve the problem if nothing else has, it’s fast and easy, and restarting the iPhone can resolve a range of issues. You may have a temporary software glitch causing your iPhone speaker to not work. A restart may solve the problem if that is the case.
7. Update your operating system
You can fix software problems by updating your operating system. Updating your operating system also fixes issues that can occur from time to time. It may be that a bug in the current version of iOS is preventing your iPhone speaker from working.
This is also unlikely to be the most effective solution, but it could help. Furthermore, it’s easy to install updates and free, so there’s no downside to it.
8. Contact Apple for support
You should consult the experts at Apple if you are unable to resolve the issue and your iPhone has no sound after trying everything you can think of. A hardware problem likely exists in the phone, so it will need to be repaired. You can reach Apple support over the phone or visit your nearest Apple Store. Make sure you get help at an Apple Store as soon as possible in case you take it there.
Some Frequently Asked Questions By Users
1. What are the signs that your iPhone speaker is damaged?
Symptoms such as no sound other than through the earpiece, crackling audio, or intermittent audio may occur when the loudspeaker is faulty or blown. It is likely that your loudspeaker needs to be replaced if any of that describes your situation.
2. What is the best way to clean my iPhone ear speaker?
Cleaning your iPhone speaker
- Grab an electronic device brush (or a clean toothbrush)
- To remove debris from the earpiece speaker (at the top of your iPhone), gently brush it.
- Blowing canned air over the speaker (without blowing air directly into it) may be necessary if necessary.
- You can test your speaker’s performance by making a call.
3. Why does my iPhone speaker sound distorted?
The speaker on your iPhone may sound distorted if your sound settings are not the right ones, or if you are running an older version of iOS. After that, use a soft cloth, electrical tape, or a brush with soft bristles to clean the speaker. If the issue persists, make an appointment at the Genius Bar to determine if the problem is hardware-related.
Now that you know how to fix speakers on iPhone, I hope that you are able to use them. In order to most effectively share this article with your friends and family, please share it with them and if you encounter any problems with this guide, please let me know in the comment section below.