How to get water out of iPhone charging port?


If you accidentally drop your phone in water, there are plenty of guides out there that will help you get the water out, but there aren’t too many that specifically mention how to clean your phone’s charging port.

In this article, I’d like to share some tips about how you can remove water from your phone’s charging port. Hopefully, these tips will be helpful to you whenever you encounter this problem. The following tips are sure to work for either your iPhone or Samsung Galaxy phone, so it doesn’t matter which one you’re using.

I find it to be a nightmare scenario if you get water into your iPhone. Even though most of the new iPhone models (iPhone 7 and higher, more recently the iPhone 12 series) come with some IP level of protection, they are none of them waterproof. You should also consider the fact that if you have an older iPhone if you get water on it or in it, it can be quite damaging. I’m going to describe how you can get water out of your iPhone if you have accidentally submerged it in water, or if you have water in the iPhone speaker, microphone, or lightning port.

Get Water Out of Your iPhone (Updated 2022)

Although the iPhone may have an official IP rating, we recommend not submerging the device in the water despite its official IP rating. Due to Apple’s policy, water-damaged iPhones are not covered under warranty, regardless of whether they are water-resistant or not. In other words, Apple will not cover you in case something goes wrong (pun intended).

The iPhone’s lightning port and speaker tend to get clogged with water more often than not, making its sound muffled as a result. Occasionally, however, the camera may be found to contain water or even moisture inside the lens, and this can make it more difficult to dry the lens. In this article, we will show you how to get water out of iPhone charging port.

How to get water out of iPhone charging port?

The most common issue with iPhones, which is why we’ll begin with it, is the fact that this is the most common problem users face with their iPhones. Here are some methods on how to remove water from your iPhone with rice, with a fan, short-cuts for Siri, and even a lot more. With the help of these, you can remove water from your iPhone’s charging port as well as from its speakers. It will take you just a few minutes to discover how to do this.

1. The use of wool

It is a good idea to use cotton wool or an absorbent cloth in order to remove water from a phone’s charging port. 

Turn your device off before removing the pin from the charging port so that the pin does not cause any bridges in the charging port.

Wrap a toothpick or a pin (which should be small enough to fit in the port) with cotton wool or a piece of absorbent clothing and leaving your device turned off for a bit so air gets inside the port would be best before turning it on, while gently moving the phone around, drying the port.

2. Use gravity

If you have a water-damaged iPhone, the first thing you should do is use gravity to rescue the phone. It is simple to tap on the iPhone’s top by pointing your iPhone’s speaker in the direction of the floor. If you are unable to get water out of the device, you can try rubbing your fingers around the frame of the iPhone.

Water droplets stuck in your iPhone speaker may also be displeasing by using this simple trick. Using this method, the droplets will fall onto the ground.

3. Using Rice

Rice is a natural product that helps your phones dry quickly, and it sure is something we know can help your charging port work well as well. It is likely that the moisture warning message is still on the phone if you have used wool, at this point you might consider putting the phone in dry rice overnight. It seems to work every time.

Note: When you place your device in rice, you should be careful. You should make sure that no particles of rice end up entering your phone after water gets out of the charging port because even the smallest particles can cause your phone some damage.

4. Use Siri Shortcut to remove water from the speaker

Those of you who have used an Apple Watch may be aware that the devices come with a handy way to remove the water which has collected in the speaker grille. There are sounds you can play to remove water from the speaker, and it is an effective way of doing it. I was surprised when I found out that the iPhone did not come with such methods built-in. The purpose of the iPhone speaker is to eject water from the speaker but it is not provided with a water ejection mechanism. However, you can create one for yourself or use Siri shortcuts to do so. Below you will find instructions on how to do it.

  • Your iPhone needs to be configured so that it is able to install shortcuts from untrusted sources. You can select the “Allow Untrusted Shortcuts” option under Settings > Shortcuts by toggling the switch. You will have to enter your passcode as a confirmation before the shortcut will be enabled.

  • Continuing, you should download and add the “Water Eject” shortcut to your iPhone via this link. If you want to add an untrusted shortcut, scroll down to the bottom of the page opening up, and then click on the button that says “Add Untrusted Shortcut”. 

  • Navigate to the “My Shortcuts” tab within the Shortcuts app now. Select “Water Eject” from the list. By selecting the “Begin” option in the menu that appears, the shortcut will begin working. During the shortcut run, you should hear several different sounds and the water should spray from your speaker.

Note: Make sure you point your iPhone’s speaker towards the floor to make gravity work for you. Additionally, be sure not to use the shortcut while wearing headphones or AirPods.

5. A fan could be useful

There is no better source of air than a standing fan, which provides more forceful and consistent airflow. Comparatively to just leaving it to dry on the dining room table, a fan can produce more concentrated air, which is dry and constant, thereby allowing all parts of the charging port to be dried quicker. After cleaning your android device or iPhone with cotton wool or a dry cloth, you should place it in front of a fan.

6. Using a vacuum hose

Another excellent option is this. You can use a vacuum hose to remove the water from the charging ports if the amount of water is not enough to cause damage to the machine. This method works well.

7. Repair a water-damaged iPhone with Silica Gel

Silica gel works well for absorbing moisture, but rice has been known to work as well. I am sure you’ve seen packets of these in the shoe boxes or bags you get inside when you go shopping. Using these silica gel pouches that are filled with silica on a daily basis, your clothes, bags, and shoes will be protected from humid weather so that they won’t get damaged.

You may want to consider using silica gel to assist you with the repair of your water-damaged iPhone if you have some on hand. It is recommended to place silica gel packets over the iPhone and leave them alone for at least 2 to 3 days. By doing so, your iPhone should be able to absorb water evaporated from it.

Note: Silica gel packets can be ripped open and iPhones buried in the silica gel beads added inside them are most effective when done this way. This can, however, also pose some risk to you, since there is a possibility that these silica gel beads will get popped.

What to do and what not to do when you drop your phone in the water?

There are several things to do or not do in the event that part of or all of your phone gets into water, or if you were soaked by the rain and water got inside your phone, or into your battery, speakers, mouthpiece, or charging port. Here is a checklist of what you should and should not do in these situations.

1. Please turn your phone off as soon as possible

As soon as you discover that water has entered your phone, you should turn it off right away as this might lead to serious consequences. Although your battery transfers mild electricity into your phone through its internal circuitry, the water contained inside of the panel is a powerful conductor of electricity and so is able to cause a great deal of damage to it. The device should be switched off and left to dry until you are 100% sure the panel is completely dry, and then you can restart the device.

2. No charge will be applied

In the case of your mobile phone, it is not recommended to plug your device into the power source as long as it is still wet, and for some time after getting the water out of the charging port. Having said that, it takes some time for the moisture to dry, so I would suggest not having the phone plugged into the power for at least five hours. It is important to use your wireless charging feature even after this time if your device comes with one. You ought to use this until you are certain that everything is working correctly.

3. Use fresh water for rinsing

Although it may seem counterproductive, there are many situations in which it makes sense. During a trip to the beach, or when your phone gets into saltwater, or into any liquid other than fresh water, it is recommended to turn off the phone and rinse it with fresh water. It is just as bad to use a phone that has substances like salt or oil in its panel or in its charging port as using a phone that is wet. Dry the phone thoroughly after washing it and dry it thoroughly, including squeezing out all the excess water. Let the phone air dry.

4. Heating Up Is Bad

It’s great if you can wrap some warmth around your phone after you drop it into a liquid, but you should be conscious of the amount of heat you expose your phone to.

 If you leave your phone outside under the sun, it shouldn’t be damaged by the elements, but if you place it too close to an electric bulb or a fireplace it’s a chance of getting damaged. You can actually leave your phone in a well-ventilated area if it gets wet from most liquid drops.

5. Turn off moisture notifications

This issue is only for people with Samsung Galaxy S7/S8, Samsung Galaxy S9/S9+, or Samsung Galaxy S10 phones that are certain their charging ports are completely dry but still receive a moisture notification. Other Android devices ought to have the same issue.

Navigate to the Settings then select Battery Usage and scroll down to the Recent Battery Usage then find and click on Android System > select Force Stop (you will receive a warning that it could cause issues). As soon as I turned it off, the “Detecting Moisture” notification went away, allowing my device to be charged.

6. Don’t try to blow the water out of your mouth

When we wonder how to get water out of the phone charging port, most of us turn to try to blow it out with a blower. However, blowing into the charging port of your smartphone often causes the water to extend further inside, making it much more difficult to remove.

Some Frequently Asked Questions by User

1. What is the best way to dry out the charging port on my iPhone?

To remove extra liquid from your iPhone, you may gently tap the lightning connector on the back of the phone while holding it with your hand. Dry your iPhone in a vented area away from direct sunlight. Connect a lightning accessory or use a lightning cable later after the device has been charged for at least 40 minutes.

2. Water damage to an iPhone affects its ability to charge?

You can permanently damage or break your iPhone Lightning port if you try to charge it while it is wet. Having this problem can prevent your iPhone from connecting to any accessories. There is no problem using your wireless charger for charging your iPhone if you have one.

3. Is there any way to make my charging port dry faster?

If you have a fan handy, or if you are able to leave your phone to dry naturally, you should do that. Alternatively, you can place your phone’s USB port near an open window, or even in front of a fan (if it isn’t raining!).

Final thoughts 

So now you know how to get water out of iPhone charging port. We would appreciate it if you could share this article with your family and friends. If you have any problems please let me know in the comments section below.

You can also read


Please enter your comment!
Please enter your name here