How To Get Water Out Of iPhone Speaker?


It is not recommended to use the iPhone 7 and iPhone 7 Plus in wet environments, even though they are listed as IP67 water and dust resistant. You can certainly label it as a contradiction, but Apple is doing this to avoid providing a warranty in case of liquid damage.

The US Food and Drug Administration proposes that, despite the iPhone 7’s ability to withstand accidental submersion, accidental splashes, bumps and bruises, and even normal use, can negatively affect this feature.

In practice, protecting an iPhone 7 from water is almost the same way you would protect an iPhone 6S, iPhone 6 or older model is the best way to be 100% safe from water damage. You will occasionally find that your iPhone will come in contact with liquid, and the liquid will come in contact with your iPhone.

This is the right place if you are having problems removing water from your iPhone.¬† Here is the complete detail about ” How To Get Water Out Of iPhone Speaker?”. The instructions below will guide you through the process of removing water from iPhone speakers.

What Problem Water Can Cause In iPhone?

Most iPhone 7 owners won’t have to worry about liquid damage if they do their best. As a result, you won’t need to worry about splashes on your iOS device.

It is possible that water will enter through the small holes of the speakers, causing an inconvenience. When your iPhone has to play audio, the sound output is muffled every time. The speaker area remains vulnerable regardless of how watertight the design is, as sound must penetrate the casing and reach our ears through tiny openings.

Apple hasn’t yet developed the technology for self-closing and opening speaker vents, a feature that’s seen in cars from BMW and other brands. Mercedes-Benz automobiles are equipped with automatic radiator grille opening and closing so that air can enter or escape the radiator.

5 Ways How To Get Water Out Of iPhone Speaker?

1. Use a lint-free cloth To Remove Water From The Speaker Of Your iPhone 

It does not come with an eject water feature like the Apple Watch Series 2 because the iPhone is not water-resistant. The new watch OS device can be programmed to play a certain tune in order to push water out of the speaker using sound waves. It must be done manually, though. To do it, follow these steps:

  • Make sure that there are no visible drops of water near the speaker.
  • Check if water is leaking out of the iPhone by placing it with the speaker facing down on a lint-free cloth.
  • Make sure that all droplets are removed by shaking and tapping your device gently with the speaker down.
  • If you have a wet iPhone, make sure it is in a well-ventilated room.

When ready, use your device to play a sound. You should be able to hear it normally. In addition, water can also result in degraded microphone functionality until thoroughly removed from the microphone port.

All iPhone models can be used with the water removal tips. With the iPhone 7 and 7 Plus, the success rate is the highest, while it slowly decreases with older generations.

You can easily remove water from your phone speaker by following these instructions. It’s important to respond appropriately when we experience an accident. Every day, more than 500 million smartphones come into contact with water with over 14 billion phones in the world.

You are likely to experience all or either of the following problems if your phone comes into contact with water.

  • Muffled audio (unclear sound) is caused by water getting into the speaker grills of your telephone.
  • Ghost Touch is possible
  • The phone goes on and off.

It is common for phone owners to drop their phones in pools or showers, or to see their phones become wet when exposed to rain or accidental splashes. As of now, there is no built-in method of getting water out of phones, especially the speaker, and not getting the water out can cause the phone problem to persist.

Many modern cell phones are designed to come with a non-removable integrated battery and Micro or Nano-Sized SIM Card, making it impossible for you to remove the back cover except for a qualified technician.

In such a case, you should follow these instructions to remove water from your phone’s speaker;

2. You Must Shake Your iPhone To Remove Water From iPhone Speaker:

Try to play a song on the phone after it has been soaked in water. The speaker on your phone should be facing downwards if the sound is muffled. Shake your phone vigorously if the sound is muffled.

In the following step, blow air from your mouth. Close to the mouth, the phone speaker’s grills are directly exposed to air, which heats the speaker.

3. Use Hairdryer To Remove Water From iPhone Speaker:

If you have access to a hairdryer, you should use it immediately. In addition to being used for drying and styling hair, a hairdryer can also be used for removing water from surfaces.

Using an electric fan to blow air across a heating coil, a hairdryer can be used to remove water from your phone’s speaker. Upon passing through the heater, the air on the coil is heated. It removes water from the speaker of the phone when the warm air reaches it.

4. Use Candlelight Heat To Remove Water From iPhone Speaker:

When a candle burns, it produces a small amount of light and heat. Various purposes can be served by this heat. To get your phone speaker heated up, shake your phone vigorously and place it near the candlelight. By shaking your phone continiously, any fluid on it will be dried up.

5. Use Tech Support To Remove Water From iPhone Speaker:

In case you experience Ghost Touch or your phone goes off and on or maybe all the methods mentioned above are not working, you should consult a phone technician as soon as possible to avoid a persistent phone problem.

How To Get Water Out Of iPhone Speaker Through App?

Don’t wait until you’ve already flooded your iPhone’s speaker and the damage will be done to the rest of the phone if you’ve already flooded the speaker. Water Eject will allow you to deal with this problem, and you can use its properties to save your iPhone.

What Is The Purpose Of the Water Eject?

With Shortcut Water Eject, the iPhone can be chaffed out of the water to dry it out, yet there is still the risk of affecting the sound quality when the water builds up on the external speaker. The Shortcut Water Eject feature will use a bass sound to force water out of the iPhone speakers, similar to the Water Lock feature on the Apple Watch.

How Can You Activate The Water Eject Shortcut?

1. You might have already downloaded the Water Eject shortcut to your iPhone, open the Shortcuts tab now.

2. Select the shortcut for Water Eject from the available list.

3. Go to the lower right corner of the screen and click on the play button.

4. Congratulations, now you need to click Start Water Ejection.

5. Approximately 10 seconds later, If one time is not enough, you can repeat this activity.

Here Are Our Related Tips For iPhone:

Previous articleHow To Set Up Siri On iPhone 12?
Next articleHow To Turn On Airdrop On iPhone 11?
The Feature Writer at Healthy Talks, Khadija, has written hundreds of how-to and troubleshooting pieces on a variety of topics. She is a former Associate Editor for Healthly Talks magazine and has previously written for the Iowa Source and educational marketing websites. Khadija holds a bachelor's degree in science and an associate's degree in education with a concentration on curriculum development.


Please enter your comment!
Please enter your name here