How To Make Braided Bracelet?

0
357

An outfit can be elevated with braided bracelets. Besides being stylish and trendy, they are also easy to make. As soon as you are familiar with the basics, you can experiment with different cord numbers, or add charms and beads to your braided bracelets. Here is the complete information about “How To Make Braided Bracelet?”

How To Make Braided Bracelet?

Step 1: Involves gathering the following materials

  •  Thread/embroidery floss
  •  scissors/ Cutting tools
  •  Tape or safety pins can be used to secure the safety pins

You can purchase embroidery floss in huge packs that are cheap. There is nothing special you need. I’d recommend six strands – if it’s not then it won’t be thick enough for a nice bracelet.

There’s also a small skein of Lion Brand yarn called Bonbons that’s perfect for tiny projects. They’re adorable, too. You can braid/knot the friendship bracelet while holding it in place using tape or pins.

Step 2: Measurement and cutting

  • It is generally recommended to cut floss in lengths that are between your fingertips and shoulder. Approximately 30 inches is a good length for me. My first one was 25 inches and it was too close. 
  • Considering my wrists are about 6 inches long, let’s just multiply your waist measurement by 5 to be safe. After all that knotting, you don’t want to run out of floss.

Step 3: Determining the number of strands

  • I’ve done eight strands at the most. I usually go for six – I prefer dainty but detailed, and it ends up being about 1/4-1/3 of an inch. 
  • Keeping track of the number of strands gets tricky with more strands, and the bracelet can get warped with more strands, so you’ll have to block it (see the last step for instructions) if you want it to lay straight.
  • In addition, you can alternate two colors or have each strand a different color, depending on what you want the pattern to be. It is very simple to make a beautiful pattern!
  • Please see the picture near the bottom of this email to get a better idea of what an eight-strand bracelet looks like.
  • It might be a good idea to add another 6 inches to a bracelet with more than six strands. Every row will result in more knots, so you’ll move through the colors a little faster.

Step 4: Starting the Bracelet

  • Tie an overhand knot in one end of your cut strands of embroidery floss and begin the bracelet.
  • This should go on top of the tabletop, pants, or pillow. Braid three inches down from this knot. Once your braid is finished, knot it again with an overhand knot at the bottom.
  • We’re going to have a lot of fun now!
  • The finished bracelet will be about 6 inches long in total (so about 3 inches of braiding on each end) and about 3-4 inches of knotting on each end.

Step 5: Starting the knotting process

By making lots of small knots, a friendship bracelet is made to look ridged, woven, and textured.

To organize your strands, you must first decide which order they should go in. Depending on this, your color rows will be arranged.

Take the first two strands once they are arranged. Your first row will be made from the strand farthest to the left. To accomplish this, you’ll need to knot it around the other strands of floss/yarn.

  •  As shown in the photo, weave the first strand over the second and then behind, and tie a knot. To give it a professional look, you must tie the knot OVER the second strand.
  •  Pull the first strand up and towards the large knot while holding the second strand taut. Pull until resistance is met, but don’t force it! You should see a knot forming on the second strand.
  •  Then, simply repeat your previous steps by tying the first strand around the second strand again.
  •  Then, continue to weave a knot on each strand of floss/yarn in the bracelet by using the first strand.
  •  Using the first strand on the left, begin knotting again when you reach the end of the last stand on the right. Make sure to knot the strands twice.
  •  Do this until three to four inches of knotting are complete.

Step 6: The final product

  • Here you are just tying two knots in each strand starting on the left and working your way across. You will always be able to see when you have completed a row by looking at the color you just carried to the right.
  • When you forget to finish a row or you miss a strand, you should be able to detect it easily. If you mess up, you’ll need a needle to pick out any knots you made – they’re so small it’s hard to discern them with your fingers.

Step 7: Putting the Bracelet Together

  • You’re ready to finish your bracelet once you’ve finished knotting 3-4 inches.
  • After you have completed the main part of the bracelet, tie an overhand knot. Once you have braided three inches, tie another knot.
  • Using the scissors, cut off the excess floss/yarn on both ends. Your project is complete!

Step 8: Tighten the knot!

  • No more wearing wet bracelets into the shower and walking around with them for hours afterward!

Step 9: Additional Stuff

  • Your bracelet might curl up a bit if you knot it in a fury. You can prevent this by pinning it or taping it to a flat surface. The fabric needs to be taut.
  • Let it dry like that after spraying it with a good amount of water (soak it! ). It will help it lay flat as well as it is called “blocking”.

Also, you may like:

Previous articleHow To Tell If Something Is Silver?
Next articleHow To Cut Dog Nails That Are Too Long?
Aroosa Raheem
Aroosa is a Web Editor for Healthly Talks and a long-time writer, editor, and researcher. For many years, she worked as an executive coach in a variety of industries. She earned her degree in communication with an emphasis on communication theory and psychology. Aroosa joined a group of iPhone and Apple consumers roughly four years ago and has since appreciated the unique and personalised feel of Apple technology and its many products.. Aroosa enjoys hiking, camping, and spending time with their diverse array of dogs when she isn't working.

LEAVE A REPLY

Please enter your comment!
Please enter your name here