Various chemicals and exposure to the elements can eat away at a pool’s surface over time, leading to costly repairs. Therefore, most pool owners must have their pools refinished every 8-10 years. If you see the plaster on your pool peeling away to the point where you can see the cement underneath, it’s time to resurface it. A resurfacing project is an ambitious one, but if you’ve got the time and know-how, it’s not impossible to accomplish. In this article, we will explain “How to resurface a pool?” Read it below!
How To Resurface A Pool?
Here’s a detailed step-by-step look at how the resurface a pool:
Step 1: one of our expert technicians, after preparing the pool, drains the water from the pool.
We make sure that the lights at the pool are working properly. Our next step is to attach a yellow sign saying that the lights should not be turned on while your pool is devoid of water.
Following this, we turn off your pool’s electrical system and any electrical attachments attached to it. In order to drain your swimming pool, we use a submersible pump that we place within it.
Step 2: The pool’s surface is stripped of old material by specially trained crews.
Before we begin this step, we ask the homeowner to please remove the following items from the pool area: balcony furniture, plants, pots, and anything else that is in the pool area.
During the sandblasting process, our specially trained crews use professional equipment to remove the flaws in the surface of the metal. It will be their duty to ensure that your chosen surface material is ready for installation.
Because this is the stage of the pool resurfacing process that causes the most dust and noise, we try to shelter the area around your pool with covers. To ensure that the resurfacing work is completed correctly and thoroughly, sandblasting is required.
During the construction process, we take care to remove all debris and excess materials at the end of each day. When the resurfacing project is complete, we go over the site again and do a final cleanup. In addition to repairing your backyard, we take special care to restore it to its original state.
Step 3: Tiles are installed and stonework is completed by skilled craftsmen.
To get ready for this step, you will have to make your final selections for your tile, ledger stones, coping such as pavers, grout color, and other ornamental features for the design.
We employ a talented team of craftsmen in our masonry department to install these components. It is estimated that the installation will take between one and three business days to complete.
Step 4: The appropriate plumbing pipes are inspected and sealed by specialists.
The plumbing around your pool is sealed with water-tight sealant. This stage also includes cleaning the pool shell.
Step 5: Your pool’s surface is finished by a team of experts.
After the finish material is applied, your swimming pool’s finish will truly come to life. You can expect this process to take between one and two business days, depending on the material you select.
Step 6: Whenever necessary, our highly-trained crews use an acid wash.
Acid washing is required for some finishes, such as Quartz with a darker finish, Hydrazzo, Beadcrete, and Pebble. We have technicians who are experienced in acid washing and will safely and quickly complete the process if you choose one of these.
We begin the process of adding water to the pool after we have completed the pool resurfacing job. You’ll be asked to turn off the water when it reaches the middle of your waterline tile.
Step 7: You must have your pool’s water treated by swimming pool service professionals.
Your professional pool service should apply a few Initial Water Treatment applications during the first week. For an even cure, you will need to monitor your pool after it is filled again. Keeping your pool in good condition requires this step. You can also extend the life of the surface material by taking this step. In order for us to provide you with this optional service, please let us know if you would like us to perform it for you.
How to Resurface your pool with Fiberglass or Plaster?
There is something refreshing about swimming pools in backyards everywhere. Exercise-inducing surfaces, playgrounds, or simply relaxing surfaces where you can soak up vitamin D.
You can enjoy a pool even just by looking at it except when it’s not. Neglected pools tend to radiate a sense of sadness more than any other landscaping element. Rather than diving right in if yours is rundown, you might want to avoid it instead.
Pools can be rejuvenated, fortunately. It might be possible to restore the luster of an aboveground pool with a new lining. You can resurface an old concrete or fiberglass pool to give it new life.
1. Fiberglass
Due to its flexible nature and resistance to ground shifting, fiberglass is a popular surfacing material. Using filler, reinforcement, and sanding, your contractor will ensure everything runs smoothly.
This is followed by a multi-layered application process. Afterward, the glass and resin coats are applied and sanded. Various topcoats in various shades and textures are then applied to seal the job.
Is this something you would like to do? Fiberglass is more durable than concrete or plaster. Also, fiberglass absorbs fewer organic substances and chemicals due to its smoother surface. Furthermore, fiberglass does not corrode when exposed to algae. With this method, you will have a pool that looks fantastic and will last for quite some time.
2. Plaster
Concrete pools can be resurfaced with plaster most economically. Certain products, such as Sider-Proof, can be used for do-it-yourself plaster resurfacing.
An experienced professional can either chip or sandblast the old plaster away depending on its level of experience. Following the bond coat, one or two coats of new plaster are applied in the color of your choice.
To maintain proper pool chemistry, more chemicals may be needed after the plaster reacts with the pool water over its lifetime. Pebbles and quartz are popular additions. The addition of quartz to plaster gives your swimming pool a more durable and decorative surface. In contrast to plaster, quartz is more resistant to staining. Among the quartz-plaster blends available are DiamondBrite by SGM and QuartzScapes by NPT.
Some of the most expensive aggregates in this category are pebble-plaster aggregates, such as Pebble Tec or Pebble Sheen, but they provide an incredibly striking look as well as a smooth, river rock-like surface. In addition, pebble blends are the most chemical- and stain-resistant plaster technique.
Another option
Consider painting instead of resurfacing your fiberglass or concrete pool if it is in decent condition. Remove the old paint with water, then apply epoxy paint (such as Nu-Pool) that will last seven to ten years. Paints based on rubber or acrylic can also be used, but neither is as durable as epoxy paint.
You may also consider retiling your pool as an option for renew it. It’s the same process as indoors. A scratch coat is applied, tiles are laid, and grout is put between them. Tiling can be an extremely expensive and time-consuming process, of course, depending on the size of your pool. However, in the end, you will have an elegant pool.
Read More:
