How To Turn Up Volume On iPhone?


The volume buttons on your iphone or in an app that plays audio can be used to adjust the volume when you are on a phone call or using an app that plays audio. Normally, if you do not have any audio playing, the buttons will control the ringtone and other notification sounds – which can also be controlled from the Settings menu. Also in this article, you will learn how to adjust the EQ to make music sound louder, as well as how to control the ringtone volume in the settings of your device. Here you will find the complete information about “How to turn up volume on iPhone?” Read it below without delay!

How To Increase The Volume On The iPhone?

Method 1: Use the volume buttons to play music and use apps

1. Find the volume buttons on your iPhone. Under the mute switch on the left side of your iPhone are these two buttons. By pressing the top button, you can increase the volume, while the second button decreases it.

  • When you’re on a phone call, listening to music, playing games, or watching movies, you can adjust the volume with the volume buttons.

2. Get on the phone or open an app. The volume buttons control the ringtone/alert volume when you are not on a call or when there are no audio apps open.

  • The Settings app offers a way to switch off volume buttons changing ringtones or notification sounds. Open Sounds & Haptics, select “Change with Buttons” and toggle it off.
  • Go to the Home screen and make sure that no audio is playing if you wish to increase the volume of the ringtones and notification sounds.

3. To raise the volume, press the top volume button. Continuing to increase the volume can be accomplished by holding down the volume control or pressing it repeatedly. In response to an increase in volume, the slider at the upper-left corner of the screen will move upward.

  • In the top-center, you will see a slider called “Ringer,” which you will use to adjust the volume of the ringtone/notification and not the audio. Try again once you’ve opened an application that plays sound.

Method 2: Increasing the volume and quality of music

1. You can listen to some music. Your iPhone’s EQ settings can be adjusted to make the music sound louder, and in general, better. If you are changing your settings while listening to music, you will be able to hear the changes in real-time as you make them.

  • If you are using the Music app that came with your iPhone, the EQ settings should work with any music-playing application.
  • Spotify’s EQ can be adjusted by tapping the gear icon at the top-right corner, selecting Playback, and then choosing Equalizer.

2. Go to the Settings app on your iPhone. In your App Library or on your home screen, it’s the gray gear icon.

3. Tap the music. Look for the icon with a red and white music note in the sixth group of settings.

4. You can find EQ in the “AUDIO” section.

5. Choose an EQ scheme. When you tap any of the EQ settings, you’ll hear what it sounds like. Some EQ settings are shown as Off by default, which means the system is just playing some music without any enhancements Other EQ settings are displayed as a preview.

  • In your EQ settings, the setting that makes the music the loudest is called Late Night. Strangely enough, it is not the one called “Loudness,” since that makes it quieter.

6. Disable Headphone Safety (optional). When you find that your headphones are not loud enough when listening to music through them, you should check whether Headphone Safety is enabled. With this feature, Apple helps to protect your hearing by making sure the volume isn’t too loud. It is easy to disable this feature.

  • The first thing you need to remember is that this setting exists to protect your hearing. I recommend you do not remove this line if you are not experiencing difficulties listening to music through headphones.
  • You will need to tap the back button twice until you return to the Settings menu (tap twice).
  • In the second group of settings, you need to select Sound & Haptics.
  • Then tap the Safe Headphones button.
  • To turn off the “Reduce Loud Sounds” feature, toggle the switch.

Method 3:With volume buttons, you can receive notifications and ringtones

1. Find the volume buttons on your iPhone. Under the mute switch on the left side of your, iPhone are these two buttons. By pressing the top button, you can increase the volume, while the second button decreases it.

  • You can adjust the volume of the ringer and alert tone on your iPhone from the Home screen as long as you don’t have another app playing audio in the background.

2. Navigate to the Home screen. The bottom of the Home screen can be slid up if your phone does not have a Home button. To get to your home screen, press the Home button if it has one.

3. To increase the volume of the alert tone, press the top volume button. If you hold down the button or press it repeatedly, you can continue to increase the volume. Once you have pressed the button, you will see a slider in the center-top of the screen that says “Hand ring”. As you press the volume-up button, the slider will move to the right.

  • Your phone is in silent mode if you see a red bell icon with a line through it next to the word “Ringer.”. If you want sound alerts to activate, simply move the Mute switch toward your screen (it is in the top-left corner).

Method 4: Setting the volume of the ringer and notifications

1. Go to the Settings app on your iPhone. You’ll find this gray gear icon on the Home screen or in the App LibrLook for the gray gear icon in the App Library or on the Home screen library.

2. Tap Sounds and Haptics. You’ll find it in the second group of settings.

3. Slide the “Ringer and Alerts” slider to the right. The ringer and notification sounds on your iPhone will be louder.

  • You can find out which sounds this change affects by looking at the “Sounds and Vibration Patterns” section below the slider.
  • You can change any of these sounds by tapping the one you want to change and choosing a different sound.

Method 5: How to use the Control Center

1. You can now open the Control Center. Swiping down from the top-right corner of the Home screen or lock screen opens the Home screen when your iPhone lacks a Home button. In the event your phone does not have a Home button, you will swipe up from the bottom of the lock screen or Home screen instead.

  • You can use the Control Center’s volume slider in the same way as the volume buttons, except that you can also do so from the lock screen.
  • This method will adjust the volume in any app that has audio, even if you are listening to music or using an app that has audio. It will instead adjust the volume of the ringtone and notifications.

2. Drag the volume slider upward. To locate this slider, look at the bottom of the slider where there is a small speaker icon. You will see that the volume will increase as you drag the slider upwards.

What to do if the volume on your iPhone is too low?

1: Software solution
2: Hardware solution

Please note:  Take care when using the tricks below because high volumes can damage your ears.

1. Software Fixes for the iPhone Volume Problem

As a starting point, let’s go over a few of the essentials that often get overlooked. The first thing you should test is your software since, if these fixes don’t work, there’s likely something else wrong with your hardware.

How is your iPhone set to silent or turned down?

When you take a picture, are you irritated by the shutter noise? The little switch at the top-left of your iPhone probably allows you to set it to Silent mode. This switch is closer to the display if you want to turn on the volume. Your phone is muted if it shows orange near the back. Music shouldn’t be affected, but your iPhone’s alarm volume will.

Under the Silent switch are the Volume buttons, which adjust sounds for videos and music incrementally. Increasing the ringer volume also works.

In the event that the buttons do not change, go to Settings > Sounds & Haptics, then check that its enabled. Alternatively, you can adjust the volume via the Control Center, which can be accessed by swiping down from the top-right of your screen (iPhone X and later). Swiping upwards from the bottom of older devices will bring you to the Control Center.

Additionally, the maximum volume can be limited. Navigate to Settings > Sounds & Haptics > Headphone Safety. Tap Reduce Loud Sounds to enable it. There should be an automatic setting of 85 decibels (described as “as loud as city traffic”); however, you can increase this quantity as high as 100 decibels (“as loud as an ambulance siren”).

In a week, your phone should let you know if you have exceeded the recommended volume levels while listening to loud music.

Does your Bluetooth device have a connection?

Would it be possible that your speakers have no problem at all? Perhaps there is another device you are connected to.

If the music you’re trying to play on your iPhone is actually sent to a Bluetooth speaker, you’d notice it. With wireless earphones such as Apple’s AirPods, you might not need to. You may also experience this problem if you use Apple TV or if your phone is connected to your vehicle’s audio system.

As mentioned above, swipe to access your Control Center and turn off Bluetooth to test this. Alternatively, you can check which devices you’re connected to by going to Settings > Bluetooth. Disconnect if necessary, and then try playing your video or music again.

Do Not Disturb Mode is enabled on your iPhone?

You won’t receive notifications while you’re busy or asleep, and calls won’t be answered while you’re asleep. You might have activated it but forgotten to deactivate it.

Make sure that Do Not Disturb is disabled in Settings > Do Not Disturb. In addition, you can check from the Control Center-Do Not Disturb is represented by a half-moon symbol.

Is it due to noise cancellation that the calls volume is so low?

During phone calls, this feature is intended to reduce background noise that might interfere with the caller’s ability to hear. However, some people have reported that this works successfully and actually stops them from hearing properly.

If Noise Cancellation is already on, go to Settings > Accessibility > Audio/ Visual and toggle it off. If it’s turned off, you might want to try activating it and see if that helps.

What are the chances of a soft reset fixing volume problems?

The classic advice to restart your computer when you experience a problem is applicable to your iPhone as well. You might be able to fix minor software issues on your iPhone by force-restarting it. Restarting won’t affect your personal data.

How Up-to-Date Is Your iPhone?

It is possible that you have an old version of iOS installed. While this shouldn’t cause sound complications, keeping your phone up to date will help you avoid any problems down the road.

To check if a new version of iOS is available, go to Settings > General > Software Update.

If the problem is a software issue for example, volume everywhere on your iPhone except when you’re using a specific app-check whether there’s an app update available. If not, you could contact the developer for assistance.

2. Hardware fixes for the iPhone volume issues

In case none of the above fixes solves your volume issue, do not panic. You do not have to schedule an appointment with Apple. Occasionally, it can be fixed on your own.

Repairing your smartphone should be done with great care.

Unless you know what you are doing, don’t take apart your device. However, you might not have to anyway if you’re lucky.

How Do You Feel About a Loose Connection?

The problem of a loose connection can be very serious. In some cases, setting it right can be very straightforward, especially if you have an older device with a Home button.

You can unlock your phone by applying a bit of force at the bottom-right corner. Gently squeeze the back of your iPhone with your thumb and index finger on the same side of the Home button (or on the back if it is a newer model). This must be continued for about 20 seconds, then released. If your phone has a loose connector, this action can move it back into place.

Your phone case may need to be removed if you use one, although it depends on how thick it is. A shatterproof model will definitely need to be removed, but a thinner plastic shell shouldn’t interfere. This same method worked for some people by applying pressure (or just tapping the phone) near the Volume buttons. However, it is vital that you avoid damaging the screen in this way.

How Can You Fix Your Phone’s Headphone Mode?

Most of this happens to older iPhones with headphone jacks, but more recent models are still susceptible to dirt in the charging port (especially if you use an adaptor to use wired headphones).

The iPhone will play music from a nonexistent connection if it thinks earphones are plugged in. By using the side buttons, you can adjust the volume; the screen will tell you if it’s being routed through another speaker.

The Bluetooth solution above should solve the problem if you use AirPods. Otherwise, shine a flashlight into the headphone jack. You might see something blocking it. The debris can be extremely small, so even if you don’t see anything, you could still have an issue.

What’s the reason for my low volume? How can I increase it?

Your phone may not be go wrong/ break down. Some people just want their music and alarms to play as loud as they can. Other times the volume of your iPhone appears muffled.

How to make iPhone music louder by adjusting the equalizer?

Videos may also benefit from this, but the improvement is primarily for music.

EQ can be found under Settings > Music. By default, this is Off, but you can amplify certain sounds when listening to music. You might want to try Late Night. It inverts audio so it reduces loud noises and amplifies quiet tones by compressing Dynamic Range.

Listening to tracks will determine the difference, as it isn’t massive. Some distortion may also result. In any case, you’ll often hear a boost in volume, especially when listening through earphones.

Amplify the sounds on your iPhone

It’s not always about technology to increase volume. The placement of your device can also influence how loud the vibrations are.

The effectiveness can be improved by turning it upside-down so that the speakers face upwards. The same thing can be accomplished by wrapping your hand around them after all, that’s how our ears work!

The surface on which you place your phone should be conductive. Wood or metal, for example, allows vibrations to travel further, thus generating more noise. The latter will particularly amplify acoustics. Avoid using absorbent surfaces like paper.

How low is the volume on the iPhone? Check out these apps.

Try using a third-party app if nothing else works. You can use Equalizer to customize your playlists so that certain aspects of the music stand out. You can tune into your favorite parts more easily by increasing the bass or vocals, much like how Late Night works.

Some features, however, require payment, and it doesn’t currently work with Apple Music because its developers aren’t allowed access to the API. Nevertheless, it still has its uses when all else fails.

Now you can hear the volume on your iPhone

It’s time to book an appointment with Apple support if the volume on your iPhone is still low or empty.

Troubles with your iPhone volume shouldn’t be too concerning, however, in most cases. A simple oversight is usually to blame.

You might also like:

Previous articleHow To Make A Slideshow On ihone?
Next articleHow To Paste On iPhone?
Aroosa is a Web Editor for Healthly Talks and a long-time writer, editor, and researcher. For many years, she worked as an executive coach in a variety of industries. She earned her degree in communication with an emphasis on communication theory and psychology. Aroosa joined a group of iPhone and Apple consumers roughly four years ago and has since appreciated the unique and personalised feel of Apple technology and its many products.. Aroosa enjoys hiking, camping, and spending time with their diverse array of dogs when she isn't working.


Please enter your comment!
Please enter your name here